EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

- Evo Engine / Turbo / Drivetrain (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain-22/)

- - clearances...what's acceptable? (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain/455712-clearances-whats-acceptable.html)

whitemonster

Oct 29, 2009 08:36 PM

clearances...what's acceptable?

okay, when you check for clearance on the main and rod bearings what is an ideal number that will be good?

JohnBradley

Oct 29, 2009 08:39 PM

1.5-2 thou on rods, 2.5 thou on mains...as I recall.

turbodoug

Nov 1, 2009 06:28 AM

Service spec calls for 0.0008" to 0.0016" on the mains... but I always set them up at 0.0015" to 0.002" with great success.

All times are GMT -7. The time now is 11:05 PM.