MAP ultimate duty VS Manley TT rods
Title says it - MAP is back ordered a week and a half- 2 weeks. Will I kick myself for going w/ TT's?
|
Originally Posted by SDevo13
(Post 8567640)
Will I kick myself for going w/ TT's?
|
TT are beastly {thumbsup}
|
Turbo tuff have been used in motors making 900whp and ran 8s as well.. Strong Rod.. You wont kick yourself..
Mik |
Either one is a good choice, but if I could do my motor over again I would have went with aluminum rods.
|
Can I use the for drop in's?
|
I'm in the same boat as you are with map. I decided to go with the manley TT rods. After doing research on them, I figured they are good rods also and can't go wrong with them.
|
Manley are a top notch rod, no worries with em
|
Originally Posted by 3gEclipseTurbo
(Post 8567814)
Either one is a good choice, but if I could do my motor over again I would have went with aluminum rods.
|
ive always heard the TT were unbelievable rods until Adam from MAP sent me a pic of a rod that was destroyed...so idk what to believe
|
Originally Posted by Ginglingston11
(Post 9273244)
ive always heard the TT were unbelievable rods until Adam from MAP sent me a pic of a rod that was destroyed...so idk what to believe
|
I have turbo tuff in my evo motor as well my first set was in a honda they were recommend to me for 800 plus hp.
|
I have the tt's in my motor and had them in one previously and they do great.
|
I think TT's have become the defacto standard for evo guys. Just like Wiesco and JE's are.
|
Originally Posted by n2oiroc
(Post 9273250)
you sure it wasnt a h beam manley?
|
All times are GMT -7. The time now is 07:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands