EvolutionM - Mitsubishi Lancer and Lancer Evolution Community - Any body using Godspeed intake manifold in a evo 9???

Page 1 of 2

Show 100 post(s) from this thread on one page

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)

- Evo Engine / Turbo / Drivetrain (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain-22/)

- - Any body using Godspeed intake manifold in a evo 9??? (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain/592937-any-body-using-godspeed-intake-manifold-evo-9-a.html)

kristian4802

Jan 11, 2012 06:42 PM

Any body using Godspeed intake manifold in a evo 9???

Hello everybody I want to buy a aftermarket intake manifold and throttle boddy any body using Godspeed intake manifold evo 9

Pssst

Jan 11, 2012 07:23 PM

up until this post I didnt even know they made one... I'm curious as well {thumbup}

kristian4802

Jan 11, 2012 07:34 PM

There only 240 ready to ship but I want to know if any body have one install and see if they think if is a good buy

EvoDan2004

Jan 11, 2012 07:37 PM

Quote:

Originally Posted by kristian4802 (Post 9884071)

There only 240 ready to ship but I want to know if any body have one install and see if they think if is a good buy

i highly suggest you do not buy that thing. if there is no reviews on it for one that should be a warning in its self. the evo 7/8/9 has been around long enough for most parts to be used and tested. dont be so cheep. buy a stock ported mani if your looking to save some cash

kristian4802

Jan 11, 2012 08:18 PM

I have one ported from bushur already just wondering if any body have the Godspeed one I guess just buy the AMS F1 will be the best right

binky

Jan 11, 2012 08:21 PM

Quote:

Originally Posted by kristian4802 (Post 9884149)

I have one ported from bushur already just wondering if any body have the Godspeed one I guess just buy the AMS F1 will be the best right

The Magnus V5 has just a slight edge over the AMS F1 in terms of overall HP.

http://magnusmotorsports.com/product...ntake-manifold

-Bink

kristian4802

Jan 11, 2012 08:44 PM

What throttle boddy you guys recommend for a after market manifold?

binky

Jan 11, 2012 09:01 PM

Quote:

Originally Posted by kristian4802 (Post 9884192)

What throttle boddy you guys recommend for a after market manifold?

Either a stock ported to 65mm by MIL.SPEC or a Boomba Racing 75mm depending on your application.

Link to Boomba Racing's throttle body:
http://boombaracing.com/evo8.html

-Bink

Pssst

Jan 12, 2012 06:40 AM

Quote:

Originally Posted by evodan2004 (Post 9884076)

This is a good point... but what if no one is willing to try it for this same reason.... Same way with other parts... wont know unless you try it.. and if know one has tried it, we'll never know :) I'm sure SOMEONE has bought them, just probably not on here....

I'm still curious about the results on them... I'd prefer to buy the AMS/Magnus if I had the money/was in the market {thumbup}

Mauricio Evo IV

Jan 12, 2012 07:40 AM

I would like to know if those ebay intake manifolds are good or not.

I think godspeed, obx, etc, are ebay brands right??

I want to buy a ported stock manifold or something cheap (my budget right now is short) and yesterday a look this Godspped and looks great but who knosk if you can get good power or not.

binky

Jan 12, 2012 07:44 AM

Quote:

Originally Posted by Mauricio Evo IV (Post 9884890)

Don't buy something just to get something, especially stuff on ebay. It's cheap for a reason.

Buy a ported stock intake manifold. They are good to 600 WHP.

-Bink

Mauricio Evo IV

Jan 12, 2012 07:57 AM

Quote:

Originally Posted by binky (Post 9884898)

Don't buy something just to get something, especially stuff on ebay. It's cheap for a reason.

Buy a ported stock intake manifold. They are good to 600 WHP.

-Bink

Yeah. I only want to know about that! I mean, both have the same price. (stock ported and ebay intake manifold). I can´t send my intake to a shop in USA because is too expensive for me (I live in Central America), but I will continue search for a cheap used ported manifold!

Jrod@Buschur

Jan 12, 2012 07:59 AM

Have you looked at our intake manifold porting and 65mm T/B conversion? This is something that we honestly sell DAILY and have had great results and feedback. These 2 pieces have been on many high horsepower, single digit drag cars.

The intake outlet is gasket match ported and runners are smoothed out. The inlet is opened up to 65mm so its a perfect match for the throttlebody conversion.

https://secure.buschurracing.com/cat...7ba8f6e0db0e31

https://secure.buschurracing.com/cat...7ba8f6e0db0e31

If you have any further questions Ill be glad to help, just ask or shoot me a message!

Mauricio Evo IV

Jan 12, 2012 08:05 AM

Quote:

Originally Posted by Jrod@Buschur (Post 9884945)

Nice!!!

One question Sir:

can I bought a stock intake manifold to some one here in evom.net and tell him that I need to send to your shop to ported the Intake?? theres no problem??

Jrod@Buschur

Jan 12, 2012 08:49 AM

Quote:

Originally Posted by Mauricio Evo IV (Post 9884958)

Nice!!!

One question Sir:

can I bought a stock intake manifold to some one here in evom.net and tell him that I need to send to your shop to ported the Intake?? theres no problem??

Yes sir, we have clients do that all the time. Just be sure to get an RA# from me to pass on to them to put on the package so we know what it is when it arrives. {thumbup}

All times are GMT -7. The time now is 02:22 PM.

Page 1 of 2

Show 100 post(s) from this thread on one page