EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Evo Engine / Turbo / Drivetrain (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain-22/)
-   -   Block identification (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain/752646-block-identification.html)

Jestersplay Jan 11, 2019 11:18 AM
Block identification
 
Ok so I have a identification chart for the evo blocks. And the engine I pulled from my car isn't on the chart. I have a 05 MR the 2 letters on the block are KN.

Pal215 Jan 11, 2019 01:59 PM
The only blocks that drop into the evo are the 4g63, 4g64, and 4g69. Do you have any of those names stamped into the block on that flat rectangular part that identifies them?

Jestersplay Jan 11, 2019 02:02 PM
Originally Posted by Pal215 (Post 11856352)
The only blocks that drop into the evo are the 4g63, 4g64, and 4g69. Do you have any of those names stamped into the block on that flat rectangular part that identifies them?
It has 4g63 stamped on it.

Pal215 Jan 11, 2019 03:35 PM
Then you're probably fine. It could be that the chart itself is outdated. Are you looking for block verification to see if the vehicle has been modified?

Jestersplay Jan 11, 2019 08:00 PM
Originally Posted by Pal215 (Post 11856370)
Then you're probably fine. It could be that the chart itself is outdated. Are you looking for block verification to see if the vehicle has been modified?
It's very possible its out dated. I've already torn it apart. It was my xmas gift to myself to find out my block was shot. I bought a good low miles block to rebuild. But am confused/curious why production year makes a difference in a OEM complete overhaul gasket kit.


All times are GMT -7. The time now is 10:15 PM.


© 2024 MH Sub I, LLC dba Internet Brands