Painting my brembos Finally?
#31
Evolved Member
iTrader: (30)
I chipped all the clear off, wiped the base down with a tack cloth and re-cleared them with ceramic engine block paint. It's still holding up well after 2 years.
The OG finish on the rear calipers is starting to come off, so it looks like I'll have to do it to the rears, as well.
If the re-spray ever comes off, I'll get them powder coated.
The stock calipers sure do look nice. But, boy! What a pain in the A$$
The OG finish on the rear calipers is starting to come off, so it looks like I'll have to do it to the rears, as well.
If the re-spray ever comes off, I'll get them powder coated.
The stock calipers sure do look nice. But, boy! What a pain in the A$$
#39
Evolved Member
iTrader: (46)
If the calipers are properly prepped, paint can last just as long as powder. I painted mine a few years ago and they still looked great. I used actual basecoat/clear through my gun.
I just recently had them redone and went to powdercoating this time, only cause I didnt feel like dealing with stripping them again and wanted to support a great guy doing coatings now.
I just recently had them redone and went to powdercoating this time, only cause I didnt feel like dealing with stripping them again and wanted to support a great guy doing coatings now.
Thread
Thread Starter
Forum
Replies
Last Post
nobodyphil
EvoM New Member / FAQs / EvoM Rules
5
Jan 27, 2011 12:56 PM
LeosEvo
Evo Tires / Wheels / Brakes / Suspension
15
Jan 20, 2008 09:16 AM