EVO owners with Greddy boost gauges??
EVO owners with Greddy boost gauges??
1.34 spike to 1.3 hold until 4500 and then tappers down to like 1.12 to 1.14.
Tapped on the BOV line.
Stock car!!!
Tell me were yours is tapped?
http://www.greddy.com/Technical/gauge_frame.htm
Link to psi convertion.
Tapped on the BOV line.
Stock car!!!
Tell me were yours is tapped?
http://www.greddy.com/Technical/gauge_frame.htm
Link to psi convertion.
Last edited by Eric Lyublinsky; Aug 7, 2003 at 08:01 AM.
I'm running a Greddy 60mm mounted in a carbon fiber pod on the steering column (RMR piece). I'm also running a manual boost controller, so my readings would naturally be different than yours.
Mine hits just over 1.4bar and holds there until 5k or so, then begins to slowly peel back to about 1.2 at redline.
I'm also tapped on the BOV line.
Mine hits just over 1.4bar and holds there until 5k or so, then begins to slowly peel back to about 1.2 at redline.
I'm also tapped on the BOV line.
Originally posted by AvatarOfWar
I'm running a Greddy 60mm mounted in a carbon fiber pod on the steering column (RMR piece). I'm also running a manual boost controller, so my readings would naturally be different than yours.
Mine hits just over 1.4bar and holds there until 5k or so, then begins to slowly peel back to about 1.2 at redline.
I'm also tapped on the BOV line.
I'm running a Greddy 60mm mounted in a carbon fiber pod on the steering column (RMR piece). I'm also running a manual boost controller, so my readings would naturally be different than yours.
Mine hits just over 1.4bar and holds there until 5k or so, then begins to slowly peel back to about 1.2 at redline.
I'm also tapped on the BOV line.
Eric
