I just bought an ARC Ti heat shield and I don't have the manifold bolts for it. I was wondering what size bolts I needed and what is suggested. I searched on here but the only thing I could find was THIS THREAD which didn't tell me jack.

 

M8 x 1.25, 12 or 15mm length

 

.75-1.00.. something short like that

 

Thanks for the exact bolt size. That really helped

 

If it uses the OEM bolts, these are the sizes and part numbers.

Bolt: MN119783 is the official part number and it's 10mm X 35mm

Stud: MN119784

 

Thanks again. I think I'm gonna go with some Titanium bolts so I'll use the m8 x 1.25 also the top ones are 15mm and the front one is 12mm just for other people to know

 

or just put a little anit seize on them the next time you take them out and put them back in...just sayin..might save you some $$

 

yeah now that you mention it, I was looking last night and I don't think I feel like spending $40 just for 4 bolts. I'm gonna get the SS ones and some antisieze and call it a day, lol

 

Any one know what size bolts I need for the stock manifold heat shield for an 06 mr?

 

ttt...

 

Same exact bolt, there is no difference.

 

M8 x 1.25, 12 is what i used

 

cool thanks every1

 

no prpblem once again !