IX Headlights not at same height.
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jan 2008
Posts: 252
Likes: 1
From: Kelowna, BC, Canada
Holy **** I'm getting frustrated. Just tried again and it didnt do **** other than strip some plastic gears.
I turned the 10mm nut, the gear moves, and something clicks then the gears proceed to strip.
I used a philips on the metal gear, same thing.
wtf do i do?
When I turn the black gear, is it supposed to turn the tiny black gear with the cable attached to it?
I turned the 10mm nut, the gear moves, and something clicks then the gears proceed to strip.
I used a philips on the metal gear, same thing.
wtf do i do?
When I turn the black gear, is it supposed to turn the tiny black gear with the cable attached to it?
Try this, it helped me a lot. Good luck! https://www.evolutionm.net/forums/ev...-leveling.html
I know about the HID step, thats not the issue. Somehow, my passenger side HID projector is shooting lower than the drivers side. The dial is on 0 on the dash.
How in the hell do I raise up the passenger side HID projector so it's even with the drivers side. I know about the black dial thing on the back of the headlight, I turned it counter clockwise with a 10mm, and it clicked. Didn't seem to adjust it at all.
Can anyone help me out?
How in the hell do I raise up the passenger side HID projector so it's even with the drivers side. I know about the black dial thing on the back of the headlight, I turned it counter clockwise with a 10mm, and it clicked. Didn't seem to adjust it at all.
Can anyone help me out?
Thread
Thread Starter
Forum
Replies
Last Post
guzmangjr
For Sale - Interior / Exterior / Sound / Styling
0
Dec 11, 2016 09:05 AM
Jason05RS
Evo Electrical / Audio / Security
5
Dec 3, 2008 10:09 AM
