Hello

For some reason out of the blue my number 1 injector plug has no power therefore no fuel for cylinder one and the car running on 3 cylinders. Has anyone experienced this before and what was the solution. Any help would be appreciated.

Thanks

 

Test the resistor pack. One of the resistors is most likely broken.

 

Had same issue while back. Injector resistor pack, assuming stock ECU car should throw a P0201 (if it's injector #1)

 

Thanks that was the issue. I guess when we put the motor in we must have clipped the connector. I had previous installed FIC 2150 injectors and put a wire nut on the five wires which I should have solder together.

thanks for all your help.
Sarge

 

Your welcome! Mine went bad sitting in the rain one day.