spitefire1

hutch959

iTrader: (18)

i dont.... i got some pictures but none of them show the rail or clearance with the throttle body.... and i dont have the car anymore.
I had the curtbrown big flange stock intake, with a S90 and the AMS fuel rail worked.... for sure.

Bladey

I used the OEM one but i couldnt use a -6an adapter, ended up selling the S90 and going for a ported stocker no regrets.

Evol_Eight

The AMS fuel rail does work with the Curt Brown ported manifold with an S90 TB

Evol_Eight

Posted a pic with AMS fuel rail

Willpegley

will this work with a -8an fuel feed going to rail? I’m having the same problem!

Evol_Eight

I just installed Torque solutions -8 AN fuel rail adapter and a - 8 AN 90 degree fitting. This setup works great. I will take a picture of it when I get off work today and post a follow up

Willpegley

Nice man! I’ve just gone a bought an stm one that comes with the -8an adapter just to overcome it. I nearly bought an ams rail as I’ve got the torque solution -8an adapter already but wasn’t sure if it would work as my Perrin would not. Ams must be a bit shorter than Perrin to work?

Evol_Eight

Im not sure on the size difference of the fuel rails. When I sent my intake to Curt 2 years ago I was researching what fuel rail would work with the S90. I stumbled on this thread and wanted to confirm the AMS fuel rail did work with CB and S90 TB with the stock feed line. I have since upgraded to the -8AN with no issues. I can take a tape measure and give you the length of the AMS rail. That way you can compare it to the Perrin rail

Willpegley

yes that would be awesome if you could?! Just for my knowledge to know the two rails differences.
you got any of your pics of your car on insta?

Evol_Eight

@Willpegley Went out to the lake and forgot all about it last weekend. Heres the skinny. AMS fuel rail is 13inches to the fitting bolt up. Here are pictures with the -8AN 90degree bend



My handle on IG is 1_day_at_8ime I mostly post on my story now