kevinmoua1

I have an 03 Evo, When I drive sometimes going into neutral or stepping into clutch the rpm will dip and the car will stall out. Any suggestions on where to start with the issue? Car is tuned speed density, fp black, kelford 272, fic 1650, supporting mods, intercooler piping, and that's about it. Thanks in advance!

evo.matt

iTrader: (3)

are you on MAF? I would start with a boost leak. I would also check your IACV. Interested to see what others say on this as well.

Ferp

Probably need to relearn idle or set your BISS properly.

kevinmoua1

yes im on maf.

bboypuertoroc

iTrader: (17)

Are you running the stock DV/recirc BOV or are you running a VTA BOV?

Evo_Goodness

Did you even try and read his original post at all lol he answers that very question.

OP I would start by hooking up evo scan and turning on se mode I think it is and set your biss screw to what's on your rom I had this same issue till I did this I couldn't even have my a.c. on in neutral till I did this

bboypuertoroc

iTrader: (17)

I completely glanced over that lol.

OP, try this thread out: https://www.evolutionm.net/forums/ec...ng-clutch.html

kevinmoua1

Not really sure how to do so but I'll search more on the forums as well. Thanks for the pointer!

Evo_Goodness

Wasn't trying to be mean lol I was just hmm lol

​​​​​​OP I know this is on DSM forums but it's the guide I used also you might have leaking TB seals I'm about to fix mine this weekend

evo.matt

iTrader: (3)

has this always done it? any changes to the car recently? I had a similar issue and it turned out to be my IACV seal was destroyed. So I replaced it with a new one and havent had the issue since, but I'm also waiting to get it retuned so this is just for some simple driving.