Stock BOV question
Jan 28, 2019, 04:31 AM
#1
Evolving Member
Thread Starter
Join Date: Apr 2007
Location: Reading, Pa
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Stock BOV question
I've tried to search the best I could, but couldn't find a definite answer. Recently tuned on speed density and still running my stock recirculating valve. Is it possible to run a speed density intake and vent to atmosphere with the stock valve until I get a new bov? Thanks.
Jan 28, 2019, 10:48 AM
#2
EvoM Guru
iTrader: (1)
Yes. I would leave the OEM BOV on there. It's the best performing one for our cars as long as you don't make more than about 28-29psi of boost. It needs to be crushed about 1/4" to handle that boost level, but it still works better than any aftermarket valve.
The following users liked this post:
DontStopMe (Jan 28, 2019)
Jan 31, 2019, 05:05 PM
#4
EvoM Guru
iTrader: (1)
