Where to get 3/8BSPT to 1/8 NPT adapter
Apr 23, 2019, 09:45 AM
#31
EvoM Guru
iTrader: (1)
Or just order the STM line because there is zero confusion that STM 100% uses a 3/8 BSPT fitting.
Jun 1, 2019, 02:16 PM
#35
I just went through this mess. They make this adapter for hydraulic fittings, but if you can't find it, you might have to use an intermediate adapter. It also sucks that NPT and BSPT are not interchangeable.
Here is a brass one that is available through a US seller.
https://www.ebay.com/itm/3-8-BSPT-Ma...IAAOSw5KFbSDS5
Make sure you use high temp thread sealant. What I hate about NPT/BSPT fittings is that they sometimes decide to leak by themselves, but the evo block has a few of them. It's borderline dark magic.
Here is a brass one that is available through a US seller.
https://www.ebay.com/itm/3-8-BSPT-Ma...IAAOSw5KFbSDS5
Make sure you use high temp thread sealant. What I hate about NPT/BSPT fittings is that they sometimes decide to leak by themselves, but the evo block has a few of them. It's borderline dark magic.