So yesterday on checking my engine bay, I saw that the cam angle sensor wiring behind the plug was worn to a point of touching each other, so I decided to redo that wiring properly,
after finishin up and trying to start the car, it cranks but it wont turn on.

car is getting no fuel, no spark, evoscan wont communicate to the ecu either.
change mfi relays, still nothing, no CEL either..
thinking it's the ecu but want to make sure everything else is checked properly.
any ideas what to check?

 

found the issue and it turned out to be a 20A engine fuse which was blown on the underhood fuse box