EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Evo General (https://www.evolutionm.net/forums/evo-general-11/)
-   -   Tuned and Dyno'd Today! Disappointed to say the least! (https://www.evolutionm.net/forums/evo-general/126239-tuned-dynod-today-disappointed-say-least.html)

krafty Mar 5, 2005 01:03 PM

Tuned and Dyno'd Today! Disappointed to say the least!
 
Baseline Run with mods listed in signature:

Max Power: 234.4 @ 6250 RPM
Max Torque: 245.8 @ 4000 RPM

After Tune:

Max Power: 262.6 @ 7000 RPM
Max Torque: 270.8 @ 3750 RPM

Very dissapointed in the baseline run with my mods :(

Anyone know why I would have such a low baseline?

tke_413 Mar 5, 2005 01:04 PM

Get TurboTrix to flash your ECU, you'll be fine.

Widebandphillip Mar 5, 2005 01:05 PM

i think that's a very good dyno. THe gains are pretty good. Dyno numbers mean just that, just numbers. You have to look at the gains and how much "area" you picked up.

qbbraveheart Mar 5, 2005 01:07 PM

yea #'s are a bit low

how much does TT charge for a reflash?

tke_413 Mar 5, 2005 01:10 PM

You also have to remember that the intake doesn't do anything and sometimes hurts your WHP until your car is tuned for it, then you see the 6-8HP gain. Those numbers are about right for what you have.

SterlingEvo Mar 5, 2005 01:10 PM

for an untuned car, that's not bad... ECU tuning is everything when it come to modding... You'll easily add 30-40WHP with a good tuner on those mods.

Blueblaze1978 Mar 5, 2005 01:11 PM

who tunned you?

krafty Mar 5, 2005 01:11 PM


Originally Posted by tke_413
Get TurboTrix to flash your ECU, you'll be fine.

This was tuned by Mark from TurboTrix on a Mustang Dyno. Evos with less mods, were putting down 30+ more HP.

tke_413 Mar 5, 2005 01:14 PM

What octane gas are you tuned for/using

krafty Mar 5, 2005 01:16 PM


Originally Posted by tke_413
What octane gas are you tuned for/using

93 Octane

tke_413 Mar 5, 2005 01:18 PM

Well, you got me...I have no idea.

Nesiop Mar 5, 2005 01:18 PM

What did you use for tuning? A reflash?

krafty Mar 5, 2005 01:21 PM


Originally Posted by Nesiop
What did you use for tuning? A reflash?

Mark from TurboTrix did a custom reflash

SterlingEvo Mar 5, 2005 01:24 PM

I'd definitely let him know and ask him what might be the problem... for a tuned car, those numbers are way low...

krafty Mar 5, 2005 01:28 PM


Originally Posted by SterlingEvo
I'd definitely let him know and ask him what might be the problem... for a tuned car, those numbers are way low...

Already talked with him after the tune. He suggested a boost leak, and to try a different boost gauge. Im already using a Defi D gauge and I also have an electronic boost gauge in my Blitz, both are not indicating any leaks. I can figure out why my baseline dyno run would be so low with all my mods....


All times are GMT -7. The time now is 03:35 PM.


© 2026 MH Sub I, LLC dba Internet Brands