|
Part Needed, just not sure where to find
https://cimg1.ibsrv.net/gimg/www.evo...cc8cab87b.jpeg
https://cimg2.ibsrv.net/gimg/www.evo...a6c8ac8e1.jpeg Hey guys, I am looking for the lining that goes above the doors, looking for black ones but not sure where I can purchased from and not too familiar with the name of it. Any help is appreciated, primarily looking for oem ones. I have provided pictures of where on the car these go, thank you. |
MR520288 MOULDING,DRIP,RH
MR520287 MOULDING,DRIP,LH Double check before ordering / Carried by many on-line suppliers |
Do you know if stm or lancer ship carry them?
Originally Posted by MinusPrevious
(Post 11773994)
MR520288 MOULDING,DRIP,RH
MR520287 MOULDING,DRIP,LH Double check before ordering / Carried by many on-line suppliers |
Yes, Lancershop has them separate or as a pair
|
Okay thanks, I’m just having trouble finding them on there so I wasn’t sure, if possible can you attach the link because for some reason it says no results found for me.
Originally Posted by MinusPrevious
(Post 11773996)
Yes, Lancershop has them separate or as a pair
|
|
Okay that one pops up, is that only for the left or is that both?
Originally Posted by MinusPrevious
(Post 11773998)
|
I had to order them from a local dealer as I couldn't get any online vendors to ship them to me. They come in very odd shaped boxes and can be damaged very easily.
Make sure you get all the clips that snap into the roof channel the butterfly ones will come on the new pieces |
How much did they come out to?
QUOTE=gsrboi80;11774111]I had to order them from a local dealer as I couldn't get any online vendors to ship them to me. They come in very odd shaped boxes and can be damaged very easily. Make sure you get all the clips that snap into the roof channel the butterfly ones will come on the new pieces[/QUOTE] |
Right about $250 for both sides
|
With the clips? Because I’m not sure what clips I would need, do you have a link or item number for the clips?
Originally Posted by gsrboi80
(Post 11774141)
Right about $250 for both sides
|
Originally Posted by InfamousEvo_8
(Post 11774142)
With the clips? Because I’m not sure what clips I would need, do you have a link or item number for the clips?
http://www.streettunedmotorsports.co...lding_clip.htm Call Brian at STM, he'll tell you how many you need. It's been a minute since I did mine but I feel like it was around 12-16 clips per side. |
Sounds good is his information on stm’s website?
Originally Posted by AWDPowah
(Post 11774176)
The clips are extra.
http://www.streettunedmotorsports.co...lding_clip.htm Call Brian at STM, he'll tell you how many you need. It's been a minute since I did mine but I feel like it was around 12-16 clips per side. |
Originally Posted by InfamousEvo_8
(Post 11774178)
Sounds good is his information on stm’s website?
|
Okay sweet, thank you.
Originally Posted by AWDPowah
(Post 11774183)
He's the parts guy at STM. If he isn't the one who answers the phone when you call just ask for him.
|
| All times are GMT -7. The time now is 05:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands