Cannot tighten nuts on o2 housing
#1
Evolving Member
Thread Starter
Cannot tighten nuts on o2 housing
I got an invidia o2 housing and I can't put the 2 nuts back on the bottom as the housing is too big and will not allow me to fit them around. Will this cause any issues if I do not put them back on?
Last edited by McRooster; Oct 4, 2017 at 04:51 AM.
#2
Evolved Member
Remove all bolts. And seperate housing from turbo and install nuts before bolts.
If i understood correctly. The nuts are hitting the housing? So if you seperate it and make the studs become short it will dive you that extra room.
If i understood correctly. The nuts are hitting the housing? So if you seperate it and make the studs become short it will dive you that extra room.
#3
Evolving Member
Thread Starter
#4
Evolved Member
Thread
Thread Starter
Forum
Replies
Last Post
AMS
Automotosports - Illinois
29
Jun 14, 2005 09:23 PM
boostedwrx
Evo Engine / Turbo / Drivetrain
3
Feb 11, 2005 05:52 PM
OZThunderGray03
EvoM New Member / FAQs / EvoM Rules
1
Feb 23, 2004 08:55 AM
cleofis
Lancer Tires, Wheels, Brakes & Suspension - Sponsored by The Tire Rack
4
Jan 15, 2004 01:37 AM