Invidia|Greddy|HKS|Walbro|Rc injectors|Perrin|TubroXS sale
 

PM us for best price or visit http://www.evogeneration.com

03-06 Evolution 8 & 9 Borla XR-1 Catback

Borla's XR-1 catback exhaust for the 2003-2006 Mitsubishi Lancer Evolution 8 & 9 features full stainless steel construction, large, 3" diameter piping, no resonators and is finished with one of Borla's reknowned single-tip mufflers to complete their signature ook and tone. All necessary hardware is included, making for a simple bolt-on installation. Borla provides a 1,000,000 mile warranty on each of their exhausts.

http://www.jscspeed.com/images/produ...453bf29190.jpg

03-06 Evolution 8 & 9 HKS Hi-Power Catback

http://www.jscspeed.com/images/catal..._thumb_mid.jpg

03-06 Evolution 8 & 9 HKS Carbon-Ti Catback

http://www.jscspeed.com/images/produ...0809536e65.jpg

03-06 Evolution 8 & 9 Invidia N1 Catback Exhaust

Invidia delivers the goods again with their N1 'regular' Catback exhaust for the 03-06 Evo 8 & 9. The N1 catback is a single canister, single tip exhaust that looks as good as it performs and sounds. Invidia uses stainless steel 3" piping for the mid-pipe and muffler finished off with a stainless steel tip to create a great combination of flow, sound and appearance. The N1 is also a great way to save weight as you will eliminate the very heavy stock exhaust system on the Evo 8 & 9. The Invidia N1 system is available with a standard stainless tip as well as a burnt titanium style tip.

http://www.jscspeed.com/images/catal...9288_thumb.jpg

03-06 Evolution 8 & 9 Invidia Turbo Outlet

Invidia's turbo outlet for the 03-06 Evolution 8 & 9 is designed to bolt up to the stock turbo and will mate to your stock or most any aftermarket downpipe. The Invidia design features an improved inner diameter for better exhaust movement and improved spool. The Invidia turbo outlet is also referred to as an O2 housing. Invidia's turbo outlet is made of cast steel for excellent heat resistance and heat dissipation. The low price and the significant increase in performance makes the Invidia O2 housing an upgrade that is hard to pass up for any Evo owner.

http://www.jscspeed.com/images/produ...f3f6c8c648.jpg

03-06 Evolution 8 & 9 Turbo XS Downpipe

The Turbo XS 3" stainless steel downpipe for the 03-06 Evo 8 & 9 is designed to bolt up between the stock O2 housing and a cat or a racepipe. The 3" design allows for optimal flow, while the stock-type donut gasket ensures proper clearance and the ability to move under engine load. Combine this with a Turbo XS cat-delete pipe (sold separately) to eliminate your cats and get maximum flow out of your Evo's turbo.
http://www.jscspeed.com/images/produ...3d9f88476f.jpg

03-06 Evolution 8 & 9 HKS SSQV III Blow Off Valve

The HKS redesigned Super Sequential Blow-Off Valve III (SSQV3) is a high performance dual stage pull-type blow-off/bypass valve capable on any turbocharged performance level, from bone stock to fully track prepped. Unlike typical push type blow-off valves, the SSQV3 can not leak under any level of boost as it is designed to keep the valve closed against its seat when under boost. Many similar valves use a push-type valve design with a large valve to accommodate high boost and high horsepower applications.

http://www.jscspeed.com/images/catal..._thumb_mid.jpg

03-06 Mitsubishi Evolution 8 & 9 Weapon R Intake Manifold

Treat your Evolution to the ultimate in induction performance with a Weapon-R performance intake manifold. Each Weapon R intake manifold is hand made to ensure top of the line quality and weigh in at only 6 pounds. Manufactured from billet Al6061 aluminum, the Weapon-R intake manifold features CNC designed velocity stacks for maximum intake airstream flow and will yield gains of up to 50 horsepower at the wheels. This manifold is designed to work with all factory sensors and is quality tested for defects before shipment.

* FITMENT:
* Mitsubishi Evolution 8 & 9 2003-2006

http://www.jscspeed.com/images/produ...918c11e4c3.jpg

03-06 Evolution 8 & 9 Deatschwerks Fuel Injectors

Deatschwerks fuel injectors are engineered to fit your OEM harness, fuel rail and manifold. Each set of Evo 8 & 9 Deatschwerks injectors are balanced within 2% variation, making them easy to tune. This means better fitment, easier tuning, and increased reliability. Deatschwerks injectors are backed by a comprehensive 12-month warranty.

750 cc and 850 are in stock

http://www.jscspeed.com/images/catal..._thumb_mid.jpg

03-06 Evolution 8 & 9 RC Fuel Injectors

RC Engineering direct drop in fuel injectors for the 03-06 Evolution 8 & 9 are available in both 750cc, 1000cc, & 1600cc capacities and are capable of handling anything from a moderate street Evo to high horsepower dedicated race builds. You can rest easy knowing that with RC injectors you are getting top quality and performance proven fuel injectors. RC Engineering injectors for the Evolution 8 & 9 are low impedance and require tuning to work properly. All RC Engineering fuel injectors for the Evolution 8 & 9 include wiring clips for direct installation.

* FITMENT:
* Mitsubishi Evolution 8 & 9 2003-2006

750cc and 1000cc are in stock (1600cc we can special order ship next day)

http://www.jscspeed.com/images/catal...1020_thumb.jpg

03-06 Mitsubishi Evolution 8 & 9 Forced Performance Green 73HTA Turbocharger

Forced Performance Turbo has improved upon every aspect of the older Green turbo. The 73HTA uses all the same bolt holes and threads as the factory Mitsubishi product, and all the castings are OEM Mitsubishi. To keep things simple, we offer the most popular version of the Green: The 73HTA with an 18psi wastegate.

http://www.jscspeed.com/images/catal..._thumb_mid.jpg

TurboXS FMIC Pipe Kit for 03-06 Mitsubishi Evo 8 & 9

The Turbo XS FMIC piping kit for the Evo 8 & 9 not only looks great, but increases overall flow and keeps air temperatures drastically lower. This hard pipe kit uses precision mandrel bent pipes that unlike most kits, allow for use with the OEM battery. The kit can also be installed with various intake systems including the factory airbox, the TurboXS & HKS Evo 8 Intakes, and similar intake systems. It is a direct bolt on with the stock intercooler, Turbo XS FMIC, as well as most other FMIC kits using factory piping locations. The Turbo XS Evo FMIC piping kit includes all necessary silicone couplers and stainless steel T-bolt clamps for install.

* FITMENT:
* Mitsubishi Evolution 8 & 9 2003-2006

http://www.jscspeed.com/images/produ...2dff9629d2.jpg

TurboXS FMIC for 03-06 Mitsubishi Evo 8 & 9

The Turbo XS front mount intercooler for the Evolution 8 & 9 uses a super strong bar and plate core for maximum performance and durability. Turbo XS designed their 03-06 Evo FMIC to fit behind the stock bumper without any extra fabrication required, so the OEM bumper beam is retained for crash protection. TXS also made installation easy by designing the Evo 8/9 FMIC to use the factory intercooler plumbing. The TXS FMIC includes silicone couplers, stainless t-bolt clamps, and mounts.

* Core Dimensions::
* 3.5" x 11.75" x 24"

* FITMENT:
* Mitsubishi Evolution 8 & 9 2003-2006

http://www.jscspeed.com/images/produ...62f75e925d.jpg

Perrin FMIC for 03-06 Mitsubishi Evo 8 & 9

Perrin's Evolution 8 & 9 front mount intercoolers are huge! Available with either the standard finish or in the stealth black finish, the Perrin FMICs are so big they stretch across the whole front grill. Perrin's US sourced cores feature bar and plate construction to maximize durability and create substantial power gains. The Perrin FMICs for the Evolution 8 and 9 uses cast aluminum end tanks to further improve internal pressure. Perrin also managed to get this monster FMIC to fit behind the factory bumper without requiring any cutting of the bumper and still retains the factory bumper beam!

* Dimensions:
* 25" x 11.75" x 3.5"

* FITMENT:
* Mitsubishi Evolution 8 & 9 2003-2006

http://www.jscspeed.com/images/catal..._thumb_mid.jpg

03-06 Evo 8 & 9 Injen Intake & Intercooler Piping Kit

How can you easily improve your Evo's performance and looks at the same time? We've got you covered. Reduce the chance of boost leaks, increase flow, and do it in style with Injen's aluminum alloy intercooler piping. This kit features a cast multi-stage tuned mid section for maximized airflow throughout the entire power band. Combined with the upper and lower intercooler piping, the system eliminates hose expansion to increase throttle body response going into boost. Injen designed this to be an easy install for easy power. Speaking of power, how do gains of up to 32 HP and 24 ft/lbs of torque sound? Includes pipes, cast mid section, composite filter adapter, filter, couplers, and instructions.

http://www.jscspeed.com/images/catal...thumb_full.jpg

Bump pm reply , PM for best price

or visit our website www.evogeneration.com

TSUDO 08-09 Mitsubishi Evolution X catback Exhaust System
http://www.erzperformance.com/v/vspf...-9360-21-2.jpg

Invidia o2 shipped to 92374 please

pm you.

Pm for best price

Bump pm all reply