Notices
Evo Show / Shine Post your pictures, photoshops, and videos!

Farmers 05 electric blue pics..

Thread Tools
 
Search this Thread
 
Old Oct 3, 2005, 04:44 PM
  #1  
Former Vendor
Thread Starter
iTrader: (107)
 
Curt@MrLed's Avatar
 
Join Date: Sep 2004
Location: A.K.A. DaFarmer
Posts: 4,364
Likes: 0
Received 0 Likes on 0 Posts
Farmers 05 electric blue pics..

Update 8-20-07

here are my pics and vids.

evo with train horns. http://video.google.com/videoplay?do...09467991880521

pt.2 http://www.youtube.com/watch?v=2zN_u2uXp0Q

big horns. http://www.youtube.com/watch?v=ZS1t1MQr9pQ
















Old rims. That are for sale.




















Interior.
i know i forgot to vacuum the floor..

















More pics below.

Mods.
engine and trans mods..

walbro 255, 90.00
power enterprises aircleaner and adapter. 90.00
ghl s.s 3 inch turbo back no cat, no muffler, 895.00
ets 3 inch front mount.
ets upper and lower i/c pipes
ets bov tube
evo 9 bov
Custom battery tray with blue mini battery.
gsc s2 cams, springs, and retainers.
s/s/ clutch line 25.00
powerflex front motor mount, 55.00
ebay oil cap. 10 dollars. hehe.
all silicone vacuum hoses, 40.00
valve cover color matched.
hand painted spark plug cover.
removing all the wire clutter, polishing alum. lines, and removing unnessecery brakets. to much time.

engine electronics..

hks evc b/c, 400.00
hks turbo timer w/ harness, 125.00
S/W boost gauge w/ holder, 45.00
S/W shift light ,142.22
S/W oil pressure gauge. 45.00
cruise control. 190.00


suspension..

tien type flex coilovers, w/ e.d.f.c., 1838.55
cusco lower frame brace, 170.00
s.s. brake lines 79.00
motul brake fluid 42.00
powerslot front rotors 279.00
project mu front and rear pads 150.00
handmade trunk support 190.00
factory color matched strut bar.
Rota 18-9 30 offset
bf g's 245-40-18 710.00
gorilla lugnuts


interior..

sparco 4 point belts and harness bar factory color matched.. too much..
tein apache doll, 35.00
interior pieces painted to factory color, 100.00
All plastic peices and the headliner painted black. 50.00
hand made by me led products throughout the interior. dome light, gauges, foot well lighting, hvac controls.
carribean customs gauge cluster replacements. 90.00
custom made cubby hole panel.
kenwood 25th anniv. cd player. 350.00
concept audio 1200w 2 ch amp 650.00
1.5 farad car, 70.00
2 treo 12's 500.00

exterior..

ebay evo carbon rear badge, 45.00
front evo carbon badge.
vortex generator 75.00
rear wing wicker bill, 40.00
3m clear film covering on the wing. 75.00
every bulb in the exterior and interior led is an led.
evo 7 red lense's by evodave, 100.00
front headlights blacked out by me.
Led custom fog lights.
Hid high beam.
Led strip in the headlight.
train horn setup, 1,300.00
nathan k3la horns, viair 450c compressor, with 5 gallon air tank. Horns are turned on by a trolley valve, the horn button, or the keyless entry.
And the shocker.. priceless.

Everything was installed, painted, or hand made by me..




Just a couple pics from old 03...














here is a couple things i make. its how i pay for my mods... im not rich, i just work hard.. pm me if you want something.


















This is with 5% percent tint over the leds on the window..






Here is a regular bulb, vs. my leds.



















Last edited by Curt@MrLed; Oct 21, 2008 at 09:00 AM.
Old Oct 3, 2005, 04:46 PM
  #2  
Evolving Member
 
hashi's Avatar
 
Join Date: Sep 2005
Location: socal
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
wow CLEANN im in love with those 3 points

Last edited by hashi; Oct 3, 2005 at 05:27 PM.
Old Oct 3, 2005, 04:51 PM
  #3  
Evolving Member
 
MAVERICKVIII's Avatar
 
Join Date: Jul 2004
Location: Sumner, WA.
Posts: 152
Likes: 0
Received 0 Likes on 0 Posts
Nice Pics...Very Clean, and I agree...sweet Sparco's
Old Oct 3, 2005, 04:54 PM
  #4  
Evolved Member
iTrader: (17)
 
hueman's Avatar
 
Join Date: Sep 2003
Location: northern virginia
Posts: 1,895
Likes: 0
Received 1 Like on 1 Post
damn i love those rims.. too bad they don't come in 18x9 flat black
Old Oct 3, 2005, 04:54 PM
  #5  
Former Vendor
Thread Starter
iTrader: (107)
 
Curt@MrLed's Avatar
 
Join Date: Sep 2004
Location: A.K.A. DaFarmer
Posts: 4,364
Likes: 0
Received 0 Likes on 0 Posts
Common causes of Premature LED Failure

Changing or disconnecting the battery while the leds are switched on.

Charging the battery with an auxiliary battery charger, or revving the engine hard with a weak or dead battery while the leds are switched on.

Using jumper cables while the leds switched on.

Excessive AC voltage due to damaged diodes in the alternator.

High system or circuit voltage. Above 15 volts.

Voltage surges caused from switching on and off amplifiers or other peripheral add on devices that use a lot of power.

Faulty or out-of spec. voltage regulators.


Please read all directions before installing. Please leave me feedback as well.



3rd brake light install..

1. Unbolt your 3rd brake light, and unplug the light harness. White plug.

2.Slide it off the rear shelf.

3. Pull the grey housing out of the 3rd brake light, and remove the red lense, and pull the bulb and its housing out.

4. Take the new led plate and slide the wires through the hole.

5. Feed the wires through the gray housing, pushing the plate into the spot where the red lense was. Clip the outer housing back on the gray peice.. If your housing is warped you have a little bit of adj. just unclip the 2 back clips just enough to allow the led plate to move. Center it and clip it back together.

6. Cut the white plug off of the bulb holder. Be sure to leave enough wire to connect the butt connetors. When connecting the 2 green wires, hold the white plug in your hand with the clip facing down, and the wires facing away from you, the wire on the right is positive. Crimp the wires with the supplied connector’s.

7. Install the 3rd brake light back onto the rear shelf of the car.. push the wires through the original hole. Bolt the brake light back in place. Now plug it in and your done.

8... DO NOT look directly into the led bulbs.. They are bright…
Enjoy




Led plate light instructions.


1. Unscrew your 2 rear plate light housings.

2. Twist the bulb holder out of the housing. Then pull the bulb out. Lastly take the rubber O-ring’s off. You will not be reusing them.

3. Turn your lights on. Plug the new led pieces in to the plug where the bulb was. If they don’t lite, unplug them and turn the plug around.. They only work one way, unlike a bulb.

4. Now slide the shrink tubing up to where the O-ring was. It should cover the factory bulb holder and the new plastic plugs... Heat it up.

Now put the new pieces up where the old lights were... Use the factory screws and bolt the new pieces up.

6. Now take the whole factory metal bracket and bend it up or down to suit your needs on how you want the leds to shine on the license plate.. You will bend it very little, if any at all. Enjoy.



Front Dome/Map lights install.

1. Take a small wide screwdriver and carefully pull the clear plastic cover off..

2. Pull the bulbs out.

3. Turn all 3 of your lights on. Take one led peice and just plug it in.. If it doesnt lite turn the plug the other way. Leds are not like bulbs, they only work one way.

4. Once you figured out the way to plug it in, Take the covering off of the tape and push the new peices onto the clear lense.. You will see the led panels match the design on the clear lense.

http://s71.photobucket.com/albums/i1...t=IMG_0515.jpg

5. Repeat the above step for the other 2 peices. Put the clear plastic peice back in and your done. Enjoy


Center dome light, no sunroof cars.

1. Take a wide thin screwdriver and insert in the slot n the clear lense and carefully pry it off.

2. Plug the led strip in. It will only work one way. So if it doesnt light turn the plug 180 degree's.

3. Unplug it, pull the covering off of the double sided tape. Both sides. Otherwise youll see a red strip in the housing. Take your time as to not pull the tape off. I have to use this style cause there is absolutly nothing that sticks to these panels. Thats the reason for the zip ties.

4. Center the panel, and stick it to the clear lense.

5. Plug it back in and push the clear lense back onto the housing.



Trunk light install.

1. Unplug the trunk light. White plug. Leave the bulb and clear holder there if desired. you wont need them.

2. Feed the wires through the center hole under the rear window. Push the wires towards the wiper motor. Pull the wires through the left side of the bracket and plug them into the white plug.
http://s71.photobucket.com/albums/i1...t=IMG_0643.jpg

3. You may want the plug above the trunk rods.
http://s71.photobucket.com/albums/i1...t=IMG_0642.jpg

4. Take some rubbing alchohol and clean the metal. Dry it. Now peel the tape off of the backside of the led, center it left or right. Use the 3rd brake light as a judgement point. Dont go by my pics as a reference point where to stick it. It goes towards the wiper more. I have 2 leds there,a white and blue one, the pics only show one led. Enjoy.



Front fender turn signal leds.

This bulb is not like a light bulb, it must be plugged in one way. If you plug it in and it doesnt work, there is no worries, just unplug it and turn it 180 degrees and plug it back in.

If you ordered this bulb, it must be used as TURN SIGNAL ONLY!
If its used otherwise it will burn out. If you try to warrenty it I will know instantly when I see if it was used other than a turn signal bulb.
Warrenty will be denied. I have specific leds for different lighting applications.



Load resistor install for led rear turn signals.

Unscrew the small black screw and pull the rear panel behind the taillights outward.. you will then see the wire harness. The load resistor gets hooked up to the white wire with the blue tracer.. Just use some double sided tape to mount it the flat portion of the body..

http://s71.photobucket.com/albums/i1...t=IMG_0513.jpg



Warrenty and Warning.

All of my leds have a purpose and function. Using my stuff for other purposes will void your warrenty. Im very specific in the uses of the products I sell. I have tortured these leds, burnt many up to simulate problems that may occur from user error. Meaning i know what happens if this stuff is used for other purposes than what I sold it to you for.

But if there is ever a problem with my products when used correctly I will go above and beyond to correct the issues. I offer a 6 month free replacement warrenty on all led products. If your not happy with my brightness I will buy the leds back from you. Im that certain of my leds and there brightnesses.


Here is where I am at. Farmer on *******.com, dafarmer69 on evolutionm.net, and my email is farmer69@comcast.net Any questions or comments feel free to ask.

Thank you.
Curt S.
Mr. Energy Leds.
www.*******.com screen name farmer.

Last edited by Curt@MrLed; Jan 15, 2008 at 05:52 PM.
Old Oct 3, 2005, 04:55 PM
  #6  
Former Vendor
Thread Starter
iTrader: (107)
 
Curt@MrLed's Avatar
 
Join Date: Sep 2004
Location: A.K.A. DaFarmer
Posts: 4,364
Likes: 0
Received 0 Likes on 0 Posts
well you could always paint them...
Old Oct 3, 2005, 04:55 PM
  #7  
Evolved Member
iTrader: (1)
 
WhatNoise???'s Avatar
 
Join Date: Mar 2004
Location: Las Vegas
Posts: 1,407
Likes: 0
Received 0 Likes on 0 Posts
Damn, man. That Blue is growing on me! Lookin' sweet, bro!
Old Oct 3, 2005, 05:01 PM
  #8  
Evolved Member
iTrader: (56)
 
Jakeg97's Avatar
 
Join Date: Sep 2004
Location: Western NY
Posts: 11,132
Likes: 0
Received 1 Like on 1 Post
looking good
Old Oct 3, 2005, 05:05 PM
  #9  
Evolved Member
iTrader: (2)
 
hel_if_ino's Avatar
 
Join Date: Mar 2003
Location: Monterey, CA
Posts: 639
Likes: 0
Received 0 Likes on 0 Posts
who's hair ties are those???
Old Oct 3, 2005, 05:06 PM
  #10  
Evolved Member
iTrader: (37)
 
ray3328's Avatar
 
Join Date: Sep 2004
Location: Long Island, NY
Posts: 3,476
Received 1 Like on 1 Post
Nice ride.
Old Oct 3, 2005, 05:09 PM
  #11  
Evolved Member
iTrader: (6)
 
AJsGenerX's Avatar
 
Join Date: May 2003
Location: Northern NJ
Posts: 1,488
Likes: 0
Received 0 Likes on 0 Posts
I know this might be a stupid question but on the SSL package, are the backseats leather as well? On the Spec Sheet...i think it only said "front leather surfaces".
Old Oct 3, 2005, 05:16 PM
  #12  
Evolved Member
iTrader: (3)
 
Talon's Avatar
 
Join Date: Jan 2005
Location: Somewhere in Oh
Posts: 977
Likes: 0
Received 0 Likes on 0 Posts
Man, EB is so beautiful... pictures don't do justice. Nice pics, though!
Old Oct 3, 2005, 05:22 PM
  #13  
Former Sponsor
iTrader: (59)
 
sr20det91's Avatar
 
Join Date: Jul 2003
Location: Deale, MD
Posts: 1,000
Received 1 Like on 1 Post
I just about got an EB when I bought my WW 05. Im kinda regreting it now. You car is beautiful. What rims are those?
Old Oct 3, 2005, 05:27 PM
  #14  
Evolved Member
iTrader: (7)
 
smokedmustang's Avatar
 
Join Date: Dec 2004
Location: Indy
Posts: 6,591
Likes: 0
Received 1 Like on 1 Post
I am jealous Farmer, all those miles at work are paying off..................wheres the stickers? your car looks bad a@@!
Old Oct 3, 2005, 05:52 PM
  #15  
Evolved Member
iTrader: (39)
 
NocturnalEVO's Avatar
 
Join Date: Mar 2004
Location: NY
Posts: 3,957
Likes: 0
Received 1 Like on 1 Post
I love those wheels!!

Car looks sick man


LancerLover: yes the rear seats are leather, and they come with adjustable headrests too.


Quick Reply: Farmers 05 electric blue pics..



All times are GMT -7. The time now is 10:12 PM.