scotty225

iTrader: (2)

all i know is that i am in love with your car. do you think you can run 255 on those?

BrendanS

iTrader: (7)

yeah, I'm on a really big 245 that measured around 250ish or so. Federals fit big, so a 255 shouldn't be a problem.

scotty225

iTrader: (2)

ok cool. but how does it look with the 25mm spacer up front and no spacer in the back. does the front stand out? i want to do those with some 255 on them so it want have such a big lip.

P.s. your car is beautiful.

BrendanS

iTrader: (7)

haha thanks, you might not be able to go as low with a 255. The fronts are noticeably more aggressive looking though with the 25mm spacer. I'm tossing on a 15 in the rear to even it out a bit more once the spring comes

ddubdb3

iTrader: (4)

@BrendanS do you have any vibration issues with that 25mm up front? and do you rub before full turn lock?

BrendanS

iTrader: (7)

Only place I rub is my fenders. If you hammer out pinch welds, trim the sideskirts, and roll/pull your fenders enough you should be fine.

Jman83112

Looks amazing on that setup have a pair on my RS but mest up bought 18x10.5 with +15 offset couldn't work them in without streching the tire looks amazing

Jman83112

Very sexy good flow on the vehicle very proper I dig alot

Anarchy99

iTrader: (196)

Picked up these to add to the build today, wanted to show off in multiple threads

CCW (Complete Custom Wheels) 18x10.5 * +25 * 3 inch lip in front and 3.5 inch lip in rear*

kbuss

iTrader: (2)

Damn, gonna need some fender work to fit those 10.5"s

Anarchy99

iTrader: (196)

Not really, CCW builds everything to spec from the lip, offset and backspacing. A roll flat would fit these but mine are pulled already.

dieselevo83

iTrader: (2)

Damn! Colors beautiful!!!! Can't wait to see the final product!

Pssst

iTrader: (8)

This omfg

h22gordo

iTrader: (18)

Think again. My buddies CCW wheels required that he shave metal off the bottom of his Brembo calipers to get them to work (after CCW told him this is their normal Evo fitment) Then the black anodized centers took 1 year to fade to flat silver.
For a "Complete Custom Wheel" pretty odd that they include spacers for fitment. If its custom, machine the back pad to bolt on the hub of the car.
FYI these were 18x9.5 CCW classics on a IX MR......and this was back when CCW did not have a bandwagon of followers. Glad this lesson was learned on someone elses expense.

Anarchy99

iTrader: (196)

I don't need to think again these are not classics they are LM20 and everyone knows classics take at least a 15mm if not 20mm to fit. The Lm20 fits fine with this offset, not to mention I do not have anodized centers I have polished.......appreciate your concern though.