Official Jdm Exhaust Fitment Thread
4 Attachment(s)
so heres where to buy an absolutely beautiful exhaust that fits the jdm bumper with NO modifications!!!!!! absolutely gorgeous and ballin as all hell. but most importantly in stock as of 4/11/08
Originally Posted by Speed Element
(Post 5527589)
I got 5 more TRUST Ti-R (80mm) exhaust systems in! holla!!
ok because the fitment thread has grown to over 30 some pages all goo'd up with one liners and meaningless banter. i am going to compile as much of it as i can in one sitting. this is a work in progress so check back often. ALL DONE AS OF 2/21/2008 33 PAGES COMPILED TO ONE. (amazing how much space one-liners consume) IF YOU CAN CONTRIBUTE TO THIS POST BY ADDING INFO THAT IS NOT ALREADY LISTED THAT'S GREAT. PLEASE DON'T ASK FOR PICTURES OF THINGS THAT ARE NOT POSTED BECAUSE.... JUST BECAUSE DONT DO IT. HERE IS THE BEST DIY / HOW TO INSTALL, PICTURES ON PAGE 5 https://www.evolutionm.net/forums/sh...light=jdm+rear AND YES YOUR O2/DOWN-PIPE/CAT OR TEST PIPE WILL HAVE A SLIGHT AFFECT ON THE FINAL FITMENT. this is just to get a really good reference point for what works. what kinda works and what really doesn't. THEESE FIT WITH NO MODIFICATIONS: USDM MITSUBISHI STOCK
Originally Posted by Skywarp
(Post 3793240)
I just installed the JDM rear with my stock exhaust. It sticks out a little but not bad at all{thumbup} I'm working on a crashbeam that will fit this bumber. It will protect a little better than some I've seen here without being heavier than the original. I will post pics as soon as I finish. :D
Originally Posted by bluej20
(Post 4419757)
OEM Stock exhaust on a IX bumper
http://img241.imageshack.us/img241/2...0456ow3.th.jpg http://img169.imageshack.us/img169/9...0454im6.th.jpg http://img295.imageshack.us/img295/2...0453hl1.th.jpg http://img247.imageshack.us/img247/3...0452oa1.th.jpg
Originally Posted by slicedbreadno2
(Post 4552506)
Here you guys go. I had a few shots left over from this kodak disposable camera. This is my Brothers Evo with the JDM Evo IX Bumper, with the AMS full 3inch TBE with 4inch tip. Edit: I am no photographer. :updown:
http://i2.photobucket.com/albums/y44/GOTS/04.jpg http://i2.photobucket.com/albums/y44/GOTS/003.jpg
Originally Posted by slicedbreadno2
(Post 4584618)
We got the Version 2 exhaust that fits 05-06 evo's. From the sides it looks like it could possibly be shortened but we left it as is. I think it looks really good.
Attachment 301105 Attachment 301106 APEXI: GT SPEC
Originally Posted by jdm_evo
(Post 2738466)
here is my apexi gt spec... you be the judge. the only thing about US spec is that it sticks out.
https://img7.imageshack.us/img7/7100/img17902en.jpg https://img7.imageshack.us/img7/9243/img17882wg.jpg
Originally Posted by boostdtalon
(Post 5344555)
http://i97.photobucket.com/albums/l2...h_102_0467.jpg
http://i97.photobucket.com/albums/l2...h_102_0466.jpg actually fits with no mod. rubs on the left side a bit. AGENCY POWER
Originally Posted by Positron
(Post 5137187)
i've seen it and it sticks out a lot.
BLITZ: NUR SPEC
Originally Posted by Evasive EVO
(Post 2875677)
I have it on my personal car... everything fits great. I'm actually going to be selling my Nur-Spec if anyone is interested.. want to go with something a little more quiet. Pictures soon! PM me if anyone is interested in buying the exhaust, thanks!
Ed @ Evasive
Originally Posted by edzilla
(Post 2879340)
https://www.evasivemotorsports.com/EDTEIN/exhrear.jpg https://www.evasivemotorsports.com/EDTEIN/exhtop.jpg https://www.evasivemotorsports.com/EDTEIN/exhside.jpg BURSHCUR: SCCA
Originally Posted by MrFairlady
(Post 2892093)
Confirmed:::
Burschur SCCA Magna fits like a Glove.installed mine today. STicks out past the bumper a tad but def not over the top.
Originally Posted by BlackTrack
(Post 3513980)
My Buschur Turbo back w/ bullet muffler fits peerfect, just need to be shortened an inch or 2.
-Ryan
Originally Posted by BlackTrack
(Post 3812758)
Here is the Buschur Bullet, it needs to be shortened by 2-3 inches, I havent done it yet. Ive already posted some earlier, but here is some more...
http://img.photobucket.com/albums/v3.../Canon792E.jpg http://img.photobucket.com/albums/v3...cture1027E.jpg http://img.photobucket.com/albums/v3...cture1021E.jpg -Ryan JGT500
Originally Posted by touchmyjagee
(Post 4242302)
some people have been wondering, including myself, whether the espelir jgt500 exhaust fits the jdm rear. i installed my rear bumper today, and it sticks out a little more than i thought. here are some pictures:
http://i4.photobucket.com/albums/y10...exhaust010.jpg http://i4.photobucket.com/albums/y10...exhaust011.jpg http://i4.photobucket.com/albums/y10...exhaust012.jpg http://i4.photobucket.com/albums/y10...exhaust014.jpg http://i4.photobucket.com/albums/y10...exhaust015.jpg the exhaust tip slightly touches the upper left part of the exhaust cutout. i think slight modification is needed. hope these pictures help anyone who wanted to know the espelir with the jdm rear setup. BEFORE AND AFTER PICS OF A ESPILER SOMETHING OR OTHER....
Originally Posted by O3EVO
(Post 4302029)
Modified Espelir...
http://i91.photobucket.com/albums/k3...I/espelir1.jpg http://i91.photobucket.com/albums/k3...I/espelir2.jpg http://i91.photobucket.com/albums/k3...I/espelir3.jpg http://i91.photobucket.com/albums/k3...I/espelir4.jpg http://i91.photobucket.com/albums/k3...I/espelir5.jpg http://i91.photobucket.com/albums/k3...I/espelir6.jpg -AFTER http://i91.photobucket.com/albums/k3...I/espelir7.jpg http://i91.photobucket.com/albums/k3...I/espelir8.jpg http://i91.photobucket.com/albums/k3...I/espelir9.jpg http://i91.photobucket.com/albums/k3.../espelir10.jpg http://i91.photobucket.com/albums/k3.../espelir11.jpg http://i91.photobucket.com/albums/k3.../espelir12.jpg http://i91.photobucket.com/albums/k3.../espelir13.jpg http://i91.photobucket.com/albums/k3.../espelir14.jpg http://i91.photobucket.com/albums/k3.../espelir15.jpg http://i91.photobucket.com/albums/k3.../espelir16.jpg
Originally Posted by memo3
(Post 4416326)
Buschur TBE w/ Magnaflow. Modified to fit it nicely
http://i185.photobucket.com/albums/x...lub/rear-1.jpg COBB
Originally Posted by silver9mr
(Post 5137855)
go with the cobb exhaust its got 2 differnt tips to chose from either the us rear bumper and the jdm bumper and i heard the cobb down pipe it the easyest one out there to install thats what im going with in the spring when i get my jdm bumper
Originally Posted by silver9mr
(Post 5531725)
looks like i got to it befor u did lol
http://i96.photobucket.com/albums/l1...andcali049.jpg http://i96.photobucket.com/albums/l1...andcali050.jpg http://i96.photobucket.com/albums/l1...andcali051.jpg http://i96.photobucket.com/albums/l1...andcali052.jpg TRUST THE MOST BALLER BEST FITTING NEXT TO ARC, OF COURSE.
Originally Posted by dog_dealer
(Post 5171323)
http://img252.imageshack.us/img252/7394/tir3ul5.jpg
http://img210.imageshack.us/img210/7923/tir1aw7.jpg http://img255.imageshack.us/img255/936/dog3wi0.jpg http://img201.imageshack.us/img201/3...arshot2ch6.jpg http://img149.imageshack.us/img149/3164/52158736si0.jpg http://img149.imageshack.us/img149/3817/dog2zq9.jpg http://img442.imageshack.us/img442/2342/dog7sv9.jpg http://img208.imageshack.us/img208/4627/dog6st0.jpg here is mine trust pe ti-r :D GARAGE HRS BALLER STATUS AND PERFECT FITMENT
Originally Posted by DrivelineSales
(Post 5250281)
Garage HRS Sports Ti Exhaust
... Only 11 lbs ;) http://www.garagehrs.com/hotparts/hr...rs-ti-mflr.jpg GREDDY: SP2 TI
Originally Posted by M5150
(Post 2736738)
So does the Greddy TI.
Originally Posted by MGAUTOS
(Post 2739580)
Greddy TI fits perfect {thumbup}
One system that doesn't clear the rear diffuser is the 3 1/2" APS system! There is a few shots of the exhaust on this thread:- https://www.evolutionm.net/forums/sh...d.php?t=179179
Originally Posted by WhatNoise???
(Post 3060901)
Here's my GReddy Ti. I've heard of a few people having issues with the bumper touching to the left of the exhaust cutout. Mine does the same thing. The diffuser just barely touches the very edge of the muffler canister. I'm an anal retentive bastard, but I've learned to let it go. I haven't trimmed it and I've been keeping my eye on it to make sure it doesn't melt. It's been fine so far. The bumper's been on since January…
http://img231.imageshack.us/img231/7816/exhaust10vk.jpg http://img231.imageshack.us/img231/8225/exhaust24bd.jpg http://img231.imageshack.us/img231/7601/exhaust31qb.jpg http://img231.imageshack.us/img231/5629/exhaust41tv.jpg http://img231.imageshack.us/img231/4487/exhaust56en.jpg http://img231.imageshack.us/img231/9576/exhaust62uw.jpg
Originally Posted by Lancer EVO IX
(Post 3531006)
new setup greddy ti. i love the blue! https://img182.imageshack.us/img182/...cn1942sqf3.jpg https://img182.imageshack.us/img182/...cn1943shx4.jpg https://img226.imageshack.us/img226/...cn1945sgp5.jpg https://img182.imageshack.us/img182/...cn1946scd0.jpg
Originally Posted by TearItUpSports
(Post 5306905)
EVO2
Originally Posted by Advan EvO V
(Post 3555870)
Greddy Evo2 ( i personally don't like fitment so I will be changing it)
http://img.photobucket.com/albums/v3...JDMREAR004.jpg
Originally Posted by Speed Element
(Post 4183299)
The new Greddy Ti-C FTW!! Straight bolt on! no modification needed on the exhaust!
http://www.speedelement.com/images/p...y/tic_onse.jpg http://www.speedelement.com/images/p.../tic_onse2.jpg http://www.speedelement.com/images/p.../tic_onse3.jpg http://www.speedelement.com/images/p.../tic_onse4.jpg http://www.speedelement.com/images/p.../tic_onse5.jpg HKS HI POWER SPEC-R TITANIUM (different than the normal high power i guess.)
Originally Posted by S1monLM
(Post 3439968)
HKS HiPower Spec-R Titanium
http://www.bjf2k.com/simon/fwdevophotos/DSC02686.jpg http://www.bjf2k.com/simon/fwdevophotos/DSC02687.jpg
Originally Posted by Boosted EVO 9
(Post 5292210)
HKS Hi-Power Spec-R Titanium Exhaust. This is Jasma certified, sounds great.
http://i239.photobucket.com/albums/f...is20073544.jpg FUJITSUBO:
Originally Posted by Rollaway
(Post 2736731)
Fujitsubo fits perfect
Originally Posted by zstryder
(Post 2739434)
Here's the Fujitsubo RM-01A, on my car.
http://www.xenoex.com/images/forums/IMG_2569.jpg http://www.xenoex.com/images/forums/IMG_2572.jpg http://www.xenoex.com/images/forums/IMG_2573.jpg
Originally Posted by Kami Speed
(Post 2775414)
All the Fujitsubo exhausts will extend out just right. We have the Legalis R, RM-01A, and Super Ti in stock. Thank you.
RSR EX-MAG
Originally Posted by mynameizstitch
(Post 3920268)
The RS-R Ex-Mag stuck out too much for my taste so I had it cut by an inch and a half. Now it sits flush with the bumper.
Originally Posted by J8dailo
(Post 4184004)
RSR exmag fits with no rubbing with JDM ix bumper but it only sticks out maybe 4 inches
Originally Posted by EvoKnievo
(Post 5291928)
RSR something i forget..... pictures before i cut the tip section and moved it back about 2 inches. but it clears with no issues prior to cutting the tip. it just sticks out like a sore thumb.
http://i23.photobucket.com/albums/b3...88/rsrtip2.jpg http://i23.photobucket.com/albums/b3...88/rsrtip3.jpg http://i23.photobucket.com/albums/b355/kom88/rsr1.jpg PICTURES AFTER THE TIP WAS CUT AND RE-WELDED, AS WELL AS A INCH BEING TAKEN OUT BEHIND THE MUFFLER http://i23.photobucket.com/albums/b3...8/IMGP5686.jpg GT-2
Originally Posted by jdmEVOIX
(Post 4002878)
the rsr gt2 sticks out and needs to be cut.
Originally Posted by gixxerman11
(Post 5267533)
TANABE ULTRA MEDALION
Originally Posted by ak47po
(Post 5535028)
Tanabe Ultra medallion fits with no cutting.
http://i87.photobucket.com/albums/k1...g?t=1208106829 http://i87.photobucket.com/albums/k1...g?t=1208106865 http://i87.photobucket.com/albums/k1...g?t=1208106930 http://i87.photobucket.com/albums/k1...g?t=1208106971 http://i87.photobucket.com/albums/k1...g?t=1208107007 http://i87.photobucket.com/albums/k1...g?t=1208109669 MEDALION
Originally Posted by Robevo RS
(Post 4184630)
i have a Tanabe Medalion Touring. Its a very quiet and unreal deep tone exhaust.
Fitment is perfect, quality is outstanding.Sorry for the crappy pictures. http://i133.photobucket.com/albums/q...6/P3030018.jpg http://i133.photobucket.com/albums/q...6/P3030012.jpg http://i133.photobucket.com/albums/q...6/P3270022.jpg http://i133.photobucket.com/albums/q...6/P3270002.jpg
Originally Posted by scenic
(Post 4256455)
Originally Posted by paracetamol
(Post 4349451)
The Concept G Blue does not fit correctly: you be the judge:
http://rallyemontagnenoire2005.mypic...tanabe/001.jpg http://rallyemontagnenoire2005.mypic...tanabe/003.jpg BUT IT FITS!!! VISNU: signature series-
Originally Posted by I'mStock
(Post 2736804)
Vishnu Signature Series.
It's the best ever. POWER AMUSE Complements to THRILLA!!!! Attachment 301107 Attachment 301108 No cutting, rubbing, or trimming. Straight up bolt on. Powerhouse Amuse Extra Titan {thumbup} SUN AUTO/HRS
Originally Posted by Speed Element
(Post 3848288)
TURBO XS:
Originally Posted by fsugatorbait
(Post 3060549)
Best pic I have of the TurboXS TBE. It doesnt stick out far at all. Pretty happy with the fitment after a few adjustments.
http://i57.photobucket.com/albums/g2...1921372529.jpg HELIX:
Originally Posted by smokey
(Post 3060584)
Full Helix TBE fits 100% perfect. This is my freinds Evo IX MR with the IX JDM bumper and his helix.
http://i7.photobucket.com/albums/y30...XBumper012.jpg http://i7.photobucket.com/albums/y30...XBumper009.jpg
Originally Posted by rjsdxm
(Post 2738302)
turbo xs fits
WORKS
Originally Posted by burningmoney97
(Post 2755069)
works ab fits perfectly
Originally Posted by threepointsix
(Post 4073903)
Works exhale fits perfect. I had tip re-welded/rotated to line up w/ bumper perfect for $30.00 to relieve the boner syndrome. Works stuff has factory flange locations so stock stuff is interchangeable.
http://img.photobucket.com/albums/v1...g?t=1173625213 http://img.photobucket.com/albums/v1...SSEVORS004.jpg and here it is:
Originally Posted by Bernie Fincham
(Post 5542020)
Works WRP Exhale
http://images31.fotki.com/v1094/phot...MG_2801-vi.jpg http://images22.fotki.com/v812/photo...exhaust-vi.jpg |
THEESE DO NOT FIT WITH OUT CUTTING AND/OR WELDING OF SOME SORT
THEESE DO NOT FIT WITHOUT MODIFICATIONS: it is very simple to mod a usdm exhaust to fit a jdm bumper. it usually cost's between 10 & 50 dollars. If you have to ask for pictures on "how" or "where" to cut it, this is way to complicated for you. if you cant tell just by crawling under your car and looking, take it to a professional because odds are you cant weld. or SAFELY use a big saw to cut the tip (if applicable) this work can be handled by a decent muffler shop 99% of the time. UNLESS you have a FULL titanium exhaust or a very high grade SS and want it to be professionally TIG welded (not always available at your local muffler shop) APEXI GT SPEC-SOME SAY IT DOES NOT FIT:
Originally Posted by evolucion
(Post 3082537)
here's mine with the GT SPEC exhaust and a little bit of bumper trimming. No cutting or welding was done to the exhaust. I love it how it sticks out.
http://i22.photobucket.com/albums/b3...G_2267evom.jpg http://i22.photobucket.com/albums/b3...G_2268evom.jpg http://i22.photobucket.com/albums/b3...G_2270evom.jpg http://i22.photobucket.com/albums/b3...n/IMG_2262.jpg
Originally Posted by Lancer EVO IX
(Post 3531006)
old setup (a'pexi gt spec) cut and rewelded to fit.
http://img170.imageshack.us/img170/6...cn1921sef2.jpg https://img170.imageshack.us/img170/...cn1938sdz3.jpg
Originally Posted by EvoSJ
(Post 4183341)
i have the espelir and it pushes up the bumper i gotta do something about that
http://i11.tinypic.com/4ddiq1x.jpg HKS: CARBON TI
Originally Posted by damstr
(Post 5249132)
HKS carbon Ti catback with AMS test pipe and downpipe.
The exhaust was modified to fit the JDM rear. http://i39.photobucket.com/albums/e1...6/DSCF0681.jpg http://i39.photobucket.com/albums/e1...6/DSCF0684.jpg http://i39.photobucket.com/albums/e1...6/DSCF0685.jpg http://i39.photobucket.com/albums/e1...6/DSCF0687.jpg http://i39.photobucket.com/albums/e1...6/DSCF0689.jpg HI-POWER (rubs)
Originally Posted by eligh2
(Post 5423324)
Originally Posted by snoop
(Post 2776215)
Here is my car with HKS exhaust. I had to trim the bumper a little
https://www.evolutionm.net/forums/sh...d.php?t=181747
Originally Posted by Derek888
(Post 2779226)
Here is my HKS hi power exhaust...fits perfect and didnt have to modify exhaust or trim bumper. Before you trim your bumpers I would higly recommend modifying your exhaust first :)
http://img148.imageshack.us/img148/1594/hks9us.jpg http://img148.imageshack.us/img148/7401/hks18rw.jpg http://img148.imageshack.us/img148/1451/hks24km.jpg
Originally Posted by snoop
(Post 3074348)
Here is what i did with HKS Hipower. I cut the bumper then went to muffler shop and have them cut and re-align the exhaust. You can't tell I cut the bumper unless you look under the car.
Here is what I would do if I did it again based on what I know. 1. Install the JDM rear bumper and look at the fitment to see where it touches 2. Remove rear bumper and put crash beam on and than drive to exhaust shop 3. Remove crash beam and then put on the rear bumper when exhaust has cooled down 4. Any good exhaust shop will cut and re-align the exhaust with anchors for $60-70 ( this should take less than 30min) I would suggest this since some people with same exhaust may have different Downpipes and highflow cats so the exhaust alignment is still slighty different. I saw this with two other people that had the HKS exhaust with JDM rearbumper. https://www.evolutionm.net/forums/at...id=89784&stc=1 https://www.evolutionm.net/forums/at...id=89786&stc=1 HYPER MAX
Originally Posted by stockEVO_8
(Post 2779104)
i jus got my evo9 rear and my HKS hipermax exhaust requires trimming!!!!
Originally Posted by TURBevO8
(Post 5205162)
Here is my contribution. HKS 30th Anniversary. Had to cut about 2" out of it and re-TIG it since it is 100% SS unlike the Hi-Power that can just be re-MIG'ed.
http://i74.photobucket.com/albums/i2..._mr_rear_b.jpg JIC
Originally Posted by TwinBeat-Evo6
(Post 2746205)
I have a JIC Magic Spartan DE Ti on my 9er (cat-back).
We had to make some minor modifications (clip away 3cm from the pipe just before the muffler) to make it perfect. Have cost us about 20 minutes of work.
Originally Posted by onesicklambo
(Post 2775427)
JIC MAGIC catback. trimmed 1/4inch off the corner of the fin..fits perfect.
BL
Originally Posted by mracing5625
(Post 3703658)
jun bl will not... you will have to cut and weld! thats what i did to mine! but still love it!
http://i23.photobucket.com/albums/b3...R/HPIM0207.jpg N-1 THIS DOESNT LOOK TO HAWT
Originally Posted by boostdtalon
(Post 5296438)
here mine with the apexi N1 i finally installed.
http://i97.photobucket.com/albums/l2...x/102_0415.jpg
Originally Posted by Marteinn
(Post 4073926)
i have evo 9 euro bumper on my evo, and i had to move the silencer 2" back.
pics later next week ;)
Originally Posted by Marteinn
(Post 4107292)
sorry car is looking like **** :/ ...stiilll working on it
i´m going to lower it a little also, dont want to burn my new rear ;p http://www.live2cruize.com/myndasafn...atti_Evo_1.jpg http://www.live2cruize.com/myndasafn...atti_Evo_2.jpg
Originally Posted by wesside
(Post 4693901)
I shortend my invidia N1 about 2"
sorry all I have now is a siggy picture after I shortned it, I'll have to take a new picture http://i57.photobucket.com/albums/g2...ars/newsig.jpg AFTER BEING MODDED
Originally Posted by Lil red '03
(Post 5170824)
Pics as promised......
Invidia N1 TBE on my GG evo 9. Hope you can see it well enough. http://i144.photobucket.com/albums/r...u/DSCN0006.jpg http://i144.photobucket.com/albums/r...u/DSCN0005.jpg MEGAN
Originally Posted by rr06rs
(Post 4693772)
megan does not fit without modifying
Originally Posted by Speed Element
(Post 5169751)
megan does not fit very well ... needs minor modifications
MAGNAFLOW
Originally Posted by R3dline
(Post 2755467)
I have the Dc downpipe with a Magnaflow ti catback and it doesnt clear, it pushes the diffuser out, heres a bad pic I took. I will be going to a muffler shop this weekend to have them fix and move my exhaust more to the side.
https://img.photobucket.com/albums/v...GSR/fixing.jpg
Originally Posted by DublXL
(Post 3330410)
I installed my JDM Evo IX couple of weeks ago and fitment was pretty damn good for the most part with the exception of rubbing of my Magna Flow Ti. I took it to an exhaust shop to adjust my hangers and it's perfect. Next is adjusting the license plate bracket. Lovin'it!!!!
PERRIN
Originally Posted by MREvo2k6
(Post 3847347)
Perrin exhaust does not fit without fabrication. I took off 2 1/2" right behind the muffler and it fits and looks great will post some good pics tomorrow
Originally Posted by BlackSport350
(Post 4559784)
The Vishnu Standard exhaust ( perrin ) fits perfectly after being shortened and having the hanger bracket moved. It actually looks far better with the JDM bumper then with the USDM one....go figure!
Originally Posted by Positron
(Post 4789003)
had the Perrin catback with jdm rear before. Yes it needed to be cut at least 3 inches in order for the muffler tip to be flush with the jdm rear bumper fins. Costs $50 at a local muffler shop.
Originally Posted by Vapor
(Post 5296738)
http://i144.photobucket.com/albums/r...7/DSC00642.jpg
http://i144.photobucket.com/albums/r...o/DSC00627.jpg Thermal catback, sticks out too much http://i144.photobucket.com/albums/r...o/DSC00630.jpg http://i144.photobucket.com/albums/r...o/DSC00628.jpg RNR
Originally Posted by M3this
(Post 3068778)
Fitment on the RNR with the JDM IX bumper is a 7 out of 10 ... I had to trim the exhaust opening a little bit but over all it worked out good. I'll take some pics tomorrow after I get off work and post them up.
|
AND A GREAT VENDOR WITH A GREAT PRODUCT!!!!!!
Originally Posted by Rexpeed
(Post 3928212)
I have CF heatshields if anyone is interested.
here is my custom 3inch exhaust http://img242.imageshack.us/img242/403/7005zr8.jpg http://img354.imageshack.us/img354/3285/7001ik3.jpg http://img242.imageshack.us/img242/9641/7004us2.jpg (feel free to send me one for the plug! talk about a captive audience! j/k) |
. .
|
my personal, UN-BIASED RECOMMENDATION on where to buy a jdm rear or a exhaust that is in list of confirmed fitments.
DRIVELINE MOTORING ---- ask for erik ( # (818) 886-DRIV ) GRUPPE S / DYNAMIC AUTO SPORT ( or whatever there name is these days) INVISION all great vendors, with the best pricing hands down. period. |
Originally Posted by draghici
(Post 5311951)
. .
|
WOOO HOOOOO its all done! Flame away!
it's now time to ask for pictures of exhaust's i just posted. and or post your opinions and comments on them (because it really matters and we all really care) |
omgomgomgomg the trust ti-r catback is friggin BALLER
|
Thank you very much my good sir.
|
thank you (:
|
you are very welcome! i just hope it helps!
my first sticky! i guess it was worth the time. :) |
glad i was able to contribute, even though i have the least popular exhaust for Evo's lol
|
Originally Posted by EvoKnievo
(Post 5313988)
you are very welcome! i just hope it helps!
my first sticky! i guess it was worth the time. :) will save a lot of people time trying to search for jdm ix rear/exhaust answers |
you have a lot of time on your hands...lol nice job bro
|
Originally Posted by BocaShula
(Post 5314551)
you have a lot of time on your hands...lol nice job bro
understatement of the year! :lol: |
All times are GMT -7. The time now is 06:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands