EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Well a couple months back my evo 8 took a dump at the track with the fp red pump gas setup. The car ran a 11.1 @123mph blowing up 2/3 the way down the track. Thank god someone had AAA at the track or i would have been stranded there! Anyway I brought the car up to CT to have my buddy look it over to see what we could do with it. Maybe put a stock motor in the car and return it to stock then sell it, but i decided since we already have everything apart why not just build this car instead of my evo 9... The verdict of the motor was that it blew a hole right through one of the pistons and completely melted it!!! So the build began! I'm taking the HTA3794r off the silver car along with the AWD Motorsports hot parts for the forward facing kit. I wanted to go crazy on the car so me and my buddy Raif, who builds lots of badass transmissions and fast a$$ cars out of his place in CT, decided to go nuts with the build. Crazy ported head, as much as you could possibly port on an evo head with 1mm oversized valves. To the valve cover Raif added huge outlets for a catch can to relieve pressure build up. Im trying to make this car an all out lightweight street machine that runs on pump gas that i can bring to the track and run 9s with. So a host of lightweight parts will be going into the car like the AMS front cross member, Buschur side diff supports, Buschur mustache bar, RS non abs brakes, talon front brakes to fit 15in wheels, a/c deleted, and taking out a lot of useless stuff inside and under the car.

Mod list:

Motor/performance:

Built 2.0 motor
Wiseco 1400hd pistons
Manley tt rods
Clevite rod/main bearings
BR stubby balance shaft elimination kit
Ported head w/ 1mm oversized valves
BR 272 cams
GSC springs/retainers/chromoly seats
JMF big catch can
Gates timing belt
New OEM oil pump/front cover
New OEM tensioner
New OEM head gasket
ARP L19 head studs
ARP main studs
STM coolant overflow tank
1/2 radiator
AWD Motorsports FF kit
FP HTA3794r
BR Upper i/c pipe
Tial 50mm BOV
BR ported intake manifold
BR 65mm ported TB
Sparktech coil on plug CDI Basic
AEM EMS w/ 5bar map sensor
AWD Motorsports Mini battery kit w/ odyssey metal jacket batter
AEM wideband
FIC 1650cc injectors
custom walboro 255 inline pump
BR Race FMIC
2 exhausts to choose from either BR bullet or a custom JDM rear exhaust

Drivetrain and suspension:

AMS lightweight front crossmember
BR diff supports
BR mustache bar
RS non abs kit
Talon front brakes
Quarter Master twin disk
a/c delete
SS upper clutch line
Avid passenger motor mount
STOCK tranny
STOCK transfercase
megan lowering springs on stock struts (prob get coilovers)

Exterior/interior

RR evo 9 jdm rear bumper
evo 9 tail lights
carbon fiber trunk
carbon fiber lip (need to order)
Ralliart mirrors
Evo 9 SE seats
carbon dash kit
evo 9 steering wheel (or a racing steering wheel)

Wheels/Tires:

17x8 Enkei RPF1's
Nitto 555s
(going to get 15in wheels at some point)
(might be getting 18in Volk GTV's)

I'm probably missing a lot but ill come back and fix it as i remember {thumbup}

Video:

http://s964.photobucket.com/albums/a...t=IMG_1283.mp4

Pictures:

http://i964.photobucket.com/albums/a...g?t=1296100217

http://i964.photobucket.com/albums/a...g?t=1296100236

http://i964.photobucket.com/albums/a...g?t=1296100251

http://i964.photobucket.com/albums/a...g?t=1296100273

http://i964.photobucket.com/albums/a...g?t=1296100290

http://i964.photobucket.com/albums/a...g?t=1296100310

http://i964.photobucket.com/albums/a...g?t=1296100327

http://i964.photobucket.com/albums/a...g?t=1296100342

http://i964.photobucket.com/albums/a...g?t=1296100357

http://i964.photobucket.com/albums/a...g?t=1296100372

http://i964.photobucket.com/albums/a...g?t=1296100399

http://i964.photobucket.com/albums/a...g?t=1296100413

http://i964.photobucket.com/albums/a...g?t=1296100427