Evo X wheel lock nuts - Is it safe to use this type?
#1
Newbie
Thread Starter
Join Date: May 2007
Location: Istanbul
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Evo X wheel lock nuts - Is it safe to use this type?
Hello,
I'm about to buy a set of wheel locks for my BBS rims, but unfortunately the importer here only has the conical types, not the one with a flat base as in the photo, the original wheel nut..
Below is probably not a lock nut but just a replacement tuner nut, but the nut on the right is the original one which has a flat bottom, and the one on the left is conical, probably 60 degrees.
The locked wheel nuts that i can buy as of now have a bottom right as the one on the left, 60 degrees conical. Is it safe to use wheel nut locks this type? Any danger to demage the wheel, or a probabilty to come off?
EDIT: This is the exact type i can buy:
I'm about to buy a set of wheel locks for my BBS rims, but unfortunately the importer here only has the conical types, not the one with a flat base as in the photo, the original wheel nut..
Below is probably not a lock nut but just a replacement tuner nut, but the nut on the right is the original one which has a flat bottom, and the one on the left is conical, probably 60 degrees.
The locked wheel nuts that i can buy as of now have a bottom right as the one on the left, 60 degrees conical. Is it safe to use wheel nut locks this type? Any danger to demage the wheel, or a probabilty to come off?
EDIT: This is the exact type i can buy:
Last edited by teasers; Apr 25, 2009 at 07:57 AM.
Thread
Thread Starter
Forum
Replies
Last Post
camillejorge8
Lancer Tires, Wheels, Brakes & Suspension - Sponsored by The Tire Rack
6
Jul 9, 2009 08:51 AM