Anti-Lift Kits Perrin vs. Whiteline in Street Mod
#78
Evolved Member
iTrader: (1)
This is why I'm here. Can't find a PSRS, nor can it be easily serviced. I'm going to buy the Whiteline KCA400M. Spoke to Whiteline and it's not an official part for the Evo 8/9 because it needs to be shimmed/spaced to fit. Which follows what is in this thread. What size spacers did everyone use, and where did they place it? Between sub-frame and bushing (top)? Diam x Thickness?
#79
Evolved Member
iTrader: (29)
This is why I'm here. Can't find a PSRS, nor can it be easily serviced. I'm going to buy the Whiteline KCA400M. Spoke to Whiteline and it's not an official part for the Evo 8/9 because it needs to be shimmed/spaced to fit. Which follows what is in this thread. What size spacers did everyone use, and where did they place it? Between sub-frame and bushing (top)? Diam x Thickness?
#80
EvoM Guru
iTrader: (50)
This is why I'm here. Can't find a PSRS, nor can it be easily serviced. I'm going to buy the Whiteline KCA400M. Spoke to Whiteline and it's not an official part for the Evo 8/9 because it needs to be shimmed/spaced to fit. Which follows what is in this thread. What size spacers did everyone use, and where did they place it? Between sub-frame and bushing (top)? Diam x Thickness?
#82
EvoM Guru
iTrader: (50)
Are the superpro bushings offset?
My understanding was that shimming was to prevent subframe/control arms from rubbing/hitting? I suppose that my priority should be geometry (Roll center, Anti-Lift, etc) but I just want to move the wheel forward to fit bigger tires.
My understanding was that shimming was to prevent subframe/control arms from rubbing/hitting? I suppose that my priority should be geometry (Roll center, Anti-Lift, etc) but I just want to move the wheel forward to fit bigger tires.
#83
Evolved Member
iTrader: (29)
Are the superpro bushings offset?
My understanding was that shimming was to prevent subframe/control arms from rubbing/hitting? I suppose that my priority should be geometry (Roll center, Anti-Lift, etc) but I just want to move the wheel forward to fit bigger tires.
My understanding was that shimming was to prevent subframe/control arms from rubbing/hitting? I suppose that my priority should be geometry (Roll center, Anti-Lift, etc) but I just want to move the wheel forward to fit bigger tires.
#85
Evolved Member
iTrader: (29)
it's in the definition, but i don't know how far offset
#86
Evolved Member
iTrader: (1)
http://www.superpro.com.au/find/supe...999500378/vid-
it's in the definition, but i don't know how far offset
it's in the definition, but i don't know how far offset
http://www.superpro.com.au/find/supe...999500378/vid-
#88
EvoM Guru
iTrader: (50)
Excellent. Thanks for the link. I only found the DURO3739K which (as you noted in the description) is NOT offset
http://www.superpro.com.au/find/supe...999500378/vid-
http://www.superpro.com.au/find/supe...999500378/vid-
Thread
Thread Starter
Forum
Replies
Last Post
mrfred
Evo Tires / Wheels / Brakes / Suspension
154
Sep 12, 2023 10:19 AM
Dallas J
Motor Sports
18
Sep 15, 2017 05:54 PM
evojesse
Evo X Tires / Wheels / Brakes / Suspension
2
Jun 27, 2017 12:08 PM