Mike01gsr

iTrader: (33)

I have the 18x9.5 +35 and you definitely need a front spacer.

https://www.evolutionm.net/forums/ev...weds-rs3s.html

YoKeutla

iTrader: (1)

Just get the 17x9.5 +32. No spacers and just a roll in the rear, pretty much perfect fitment in my mind.

Tires are 255/40/17 and I am lowered on Tanabe springs with MR Bilsteins

http://www.flickr.com/photos/75941865@N02/6974671523/http://www.flickr.com/photos/75941865@N02/6974671523/ by http://www.flickr.com/people/75941865@N02/, on Flickr

http://www.flickr.com/photos/75941865@N02/6973139367/http://www.flickr.com/photos/75941865@N02/6973139367/ by http://www.flickr.com/people/75941865@N02/, on Flickr

http://www.flickr.com/photos/75941865@N02/6973135541/http://www.flickr.com/photos/75941865@N02/6973135541/ by http://www.flickr.com/people/75941865@N02/, on Flickr

Blitz

iTrader: (11)

OP, did you ever find out conclusively if 17x9 +35 requires a spacer or not? According to RavSpec they do not. According to Emery at STM, the only guy on here running them as far as I know, they do need a front spacer.

Russell K

iTrader: (12)

You're right to be confused.

Since I am on stock suspension, I think I am going with the 17x8.5 +32 and pinch some 255/40/17's just a lil bit. That should give me the look I am after. I think it would look so silly to have a ton of offset on a stock height Evo.

Mark at RavSpec is a great guy and answers all my questions patiently and nicely. To make the 17x9 +35 work Mark told me that you will need a very small spacer on the front to clear the calipers and that a 3mm spacer should work.

I cannot confirm this of course......

SWOLN

iTrader: (6)

18x9.5 +35...

Blitz

iTrader: (11)

There's a 17x8.5 +32? Damn they make these in a lot of sizes. I thought it was 17x8 +32.

https://www.evolutionm.net/forums/ev...bs-18-lbs.html

Blitz

iTrader: (11)

Very nice. Did they come in black? If so where did you get them?

YoKeutla

iTrader: (1)

Evasive has them.
http://www.evasivemotorsports.com/mm...de=WEDS_TC105N

SWOLN

iTrader: (6)

Yes, but I'm sure they just painted them. I had mine powder coated.

Russell K

iTrader: (12)

I am for sure going with the 17x8.5 +32 and pinch (slightly) a 255/40/17 on the wheels.

Mark from Ravspec answered my questions again and confirmed 17x8.5 +32 will fit fine without any modifications.

He is a great guy to deal with, I cannot stress that enough.

I like the Matte Black!

I wonder if the Black is harder to get? I am sure it is.

Blitz

iTrader: (11)

17x8.5 +32 sounds like an awesome choice. I was worried they wouldn't be concave compared to the 17x9s but then I found these pics. They look plenty concave to me.

http://clubroadster.net/vb_forum/showthread.php?t=39436

17x8 +32 on the left, 17x8.5 +32 on the right





On a 240SX

MDA89

hey i actually have 2 BRAND new 17x9 +25 tc105n's that i bought from stm that ill sell at a good price so you only have to pay full price for 2..

Russell K

iTrader: (12)

I have searched and searched and I am familiar with those pics. Those and others I found are what made me decide on that. Thanks for agreeing lol.

Russell K

iTrader: (12)

I have talked to several vendors today and over the past few days on the phone There are very few sets of TC105N's in the country. I would think Matte Black is going to be a very rare thing. I could be wrong though I hope I am. I would prefer the Matte over the regular silver.

fugiwara

iTrader: (124)

Russell, did u buy the wheels?