When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- TE37SL 18x10 20p
- 265/35/18 semi slicks
- guards rolled all round
- max camber on the rears, need to run 255s or 245s cos the tyres still touch the guards
Rims:CE28N Genesis 17x9.5 +28
Tyres: AD08R 45/235 x17
Suspension: Tein mono flex with EDFC
Rims fit perfect without any modification
Front on -3.5 camber Rear on -1.5 camber
Rims:CE28N Genesis 17x9.5 +28
Tyres: AD08R 45/235 x17
Suspension: Tein mono flex with EDFC
Rims fit perfect without any modification
Front on -3.5 camber Rear on -1.5 camber
Welcome to the EvOM boards @haha9413 Really like the wheel/tire set-up. Would prefer a wider tire but not familiar w/the CP9A rear arches
Enkei Rpf1 17x9.5 +38
Continental 255/40r17 Extreme Contact Sport
Ohlins R&T Cbrd spec’d
Doesnt seem to rub anywhere but if I go lower fender will get rolled in the rear.
Avid 06’s 18x9.5 hyper black with 14mm offset all around, on 255/35/18 continental control contact srs’s. Raceland coilovers. No roll in front, rolled rears.
Hey thanks for the comment! I’m very happy with it. We had a little trouble with the right side but I think it’s the camera angle lol it sticks out about a few mm’s More on the right. But I gotta get a little clear coat for the right side. Left side was no problem. But yea over all great. Only get rub when hitting bumps over like 40mph. Lol but nonetheless happy. Thanks for commenting man!
Originally Posted by MinusPrevious
I like it. Looks proper for sure
Hey, is this a fender protrusion due to the roll or an optical illusion. We had to push my fender out there to fit my setup
Hey thanks for the comment! I’m very happy with it. We had a little trouble with the right side but I think it’s the camera angle lol it sticks out about a few mm’s More on the right. But I gotta get a little clear coat for the right side. Left side was no problem. But yea over all great. Only get rub when hitting bumps over like 40mph. Lol but nonetheless happy. Thanks for commenting man!
Thanks for the honest assessment. Yeah, +14's are super tough to fit & are not meant for track use. But you have made them work for the street & thats cool. They look great
I just wanted to make sure what i was seeing in the fender. I have the same pooch but mine is more pronounced due to the 275 rubber. The rear quarter is the choke point for the aggressive wheel
Looks real nice Dallas. The flares will really clean it up & give it even more of a finished look
Yeah, I think flares will help a lot. Im working on the splitter now and need that done first so I can integrate the front flares into the spitter to act as my wheel block too. Gonna look meaty!
May 1, 2019, 01:22 PM
