Konig Hypergram Question
#17
Evolving Member
I see he went with 18x8.5 +35 so im going to assume a 17x9+25 would fit.
was wondering if the orignal poster can take some side angled shots like to see if they concave or what they do at a 8.5 wide wheel
was wondering if the orignal poster can take some side angled shots like to see if they concave or what they do at a 8.5 wide wheel
#19
Evolving Member
#20
Pictures are hard to make out, but in person they are relatively flush. Now that I've got ARP extended studs up front, I suppose I could go up from the 5mm spacer to push the wheel out more. I'm still on the stock rear studs, so maybe in the future I'll replace those as well and go 10mm spacers all around. As is, I'm happy. I just wanted lighter wheels that I liked visually for under $1K, these wheels definitely accomplished that. If you want a more aggressive stance, the specs I got are probably not the way to go.
#21
#22
Evolving Member
#23
#24
Evolving Member
I'm not slammed so i get away without a roll but it sometimes rubs on the left rear depending on the road. With that being said i might do a slight roll but nothing crazy a 265 tire depending on the tire probably will need a roll im going to guess because it pokes on my car so you wouldn't have any stretch in the tire.
Thread
Thread Starter
Forum
Replies
Last Post
2wdSQL
Lancer Tires, Wheels, Brakes & Suspension - Sponsored by The Tire Rack
8
Aug 9, 2004 07:05 AM
CivicEater
Northwest Region
1
Oct 19, 2002 09:02 AM
cnile51
Lancer Tires, Wheels, Brakes & Suspension - Sponsored by The Tire Rack
11
May 22, 2002 02:23 AM