My Gold Volk Le28s I Received Yesterday :)
 

wheels:

VOLK LE28 gold 18x9.5
front +28mm offset and rear +34mm offset

CHECK OUT THE LIPS ON THESE BAD BOYS!!!!!!!!!!! :shock:

I AM THINKING ABOUT SELLING THESE BECAUSE I HAVE ANOTHER SET ON THE WAY, BUT DIFFERENT COLOR.

HIT ME UP IF INTERESTED.

here are a few pix:

WHEELS NEXT TO CAR
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

CLOSE UP OF FRONT
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

CLOSE UP OF REAR
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

WHEELS NEXT TO CAR PART2
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

CLOSE UP OF REAR
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

CLOSE UP OF FRONT
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

BOXES WITH MARKINGS
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

I AM THINKING ABOUT SELLING THESE BECAUSE I HAVE ANOTHER SET ON THE WAY, BUT DIFFERENT COLOR.

HIT ME UP IF INTERESTED.

I'd be interested in a different color. How much did you pay for them and where did you get them from if you don't mind me asking? Also, what other colors do they come in - I want gunmetal?

How much?

are you selling your stock rims and tires?

i don't want to discuss price, pm me if interested.

i could get a set of gunmetal for you from a shop i am sponsored with, but there is a 3 month wait from MACKIN (RAY'S/VOLK IMPORTER) right now.

the wheels i have are a custom offset and not the norm you would get from VOLK.

the ce28s come in standard white and bronze, and to get a custom color would be a little extra fee of $30/wheel (if volk didn't increase the special color prices in 2005)
some of the colors are green, red, diamond black, g-black, titanium silver, titaium gunmetal.

you mean the MR BBS wheels? not right now, but probably soon.

the 2 ce28s i have or will have will be my wheels for my big brake kit and i will no longer be needing the MR BBS wheels.

the BBS MR wheels will be sold if i don't sell my gold le28s.

-john

Are you gonna sell your stock MR wheels / tires?

Wheels for sale
 

How much are you asking for the gold volks? Also are you selling your MR wheels and tires? I'm located in Cali and interested in either. {thumbup}

ok, for all who asked, here is a teaser pic of the wheel i am supposed to be receiving.

g-black ce28 limited edition
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
also, here are a few other pix of the g-black on a te37 and the titanium gunmetal on the ce28 and te37 courtesy of evolution autosports.

http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

I saw those wheels at SEMa they look great.

I would be scared to all hell to spend all that money and then scratch or scrape them

Here is a dual shot :D

That's how I feel, but I drive like a grandma around city streets.

Those wheels are beautiful. Will they fit without fender modification? Check your pm.

ahhh i want some wheels so bad cant convince my self to spend the money !

evoisdream

badass rims.great choice for the evo,and probably the best looking rims for evos.18x9.5,thats eXtreme!!! :p

Let's go get a Mountain Dew, dude!

where can i get those beauties. the limited edition g black ce28n. how do u think that would look on a tarmac black evo?

:lol: i knew someone would know what i meant when i posted that {thumbup}

would look great on tarmac :updown: of course everything looks great on black evos ;)

The ce28 in titanium look sick. After the winter those might be my new rims with some
R compound.

sweeet

Okay first question where can i get the different color volks? Secondly can the evo take 18X9.5! i thought there would be rubbing and all? well pm thanks...

those wheels are nice. I really dig the gold ones

had this size and offset since july of last year. no problems.

here are a few links of pix with my bronze ce28s with the aggressive wheel size and offset.

https://www.evolutionm.net/forums/sh...ighlight=ce28s

https://www.evolutionm.net/forums/sh...ighlight=ce28s


https://www.evolutionm.net/forums/sh...hlight=do-luck

Better on black than any other color. I wish I had the gloss back in te37's as well as my gold ce28n's.

those black TE37s w/polished lip look veryyy nice

Do you still have those Ce28ns?

Sent you a pm

pm sent...

Black TE37s!? Where do you get those at! They look ****ing amazing!

They should be available soon. Send Mackin a link to this thread and all the others on the gloss black color and I bet they will be out even sooner.

talked to my contact at Mackin already, they have not put an order for inventory for the g-black te37s or ce28s, so it is custom order right now with a 3 month wait time.

-john

are they going to mass produce them for the evo's fitting?

MACKIN will be getting some sets in for the EVO, but as of now, no orders have been placed for general inventory at all for the g-black te37s or ce28s.

the only ones they will be getting early are the preordered ones from customers.

-john

I know the front 18 x 9.5 with +28 offset wont rub but what about 18 x 9.5 with +34 offset at the rear ? will it rub ?

with the right tire and not totally slammed, it will be fine.

that is the reason for the 34 on the rear, so it doesnt rub.

Hey, you guys think the black ce28's or te37 would look good on a BBY? B/C i want to spend that money and don't wanna buy something that would look stupid...

they look great, i was planning on a set of VR Mercury Silver CE28N's in 18" x 9.5" myself.

i think the only other rim i'd really consider would be the sportec mono/10 in anthracite.

May i ask what size tire is right ? what about 245 - 40 - 18 ? thx for the info btw {thumbup}

that's what i had on my bronze set of ce28s.

i will be running 255/35 18"

if you rolled the rear fenders, you can probably do 265/35 18".

Very nice jbigelow , right now i have a Project U four piston four pads brake kit at the front so it should be no problem to fit the 18 x 9.5 with +28 offset right ? cant wait for someone put those badass wheels on {thumbup}

it should fit because i will be running endless 6pot front and 4 pot rears, or the same set-up but from alcon.

-john

just wanted to let everybody know who were interested in my gold le28s that i am no longer selling these as of now.

i cancelled my order on my g-black le28s because they didn't carry the offset needed for the rear wheels for my evo.

the only application all around available for the evo in the g-black le28s will be the standard 18x8.5 +30 offset.

the tires that i will be running for the gold 18x9.5 le28s will be either falken st-115 or hankook ventis k140.

when the new falken azenis rt-615 come out, that will be my tire of choice.

-john

I love volks, but Im gonna go with a set of CCW's or possible Velox ProGears. But the sizing is 18x9.5...and the offsets are? I'd like to know just so I can stagger the wheels. What are you using for tire size? I have a set of G-Force KD's sitting at work in 245/40R18's, but the TireRack has those dunlop R compounds in 255/35R18's for like 128 bucks...can't go wrong with that!

I can get the Gloss Black TE37 Limited's in 18x8.5 +30 for $580/ea shipped. PM me if you're serious.

who is MACKIN

the USA importer for RAY'S/VOLK wheels.

:headbang: I agree. You mean these?

http://gallery.evolutionm.net/data/500/20572CE28N-2.jpg

http://gallery.evolutionm.net/data/500/20572CE28N.jpg

do you have a shot of them like that in mercury silver?

What Type Of Lip Is That?

do-luck

Yeah the ce28 in titanium look good. Everyone gets them in bronze or gold so it's a nice change.

Sorry, man. I sure don't. :(

here is the best mercury silver pic i could find:

http://www.upgrademotoring.com/wheel...8N_Msilver.jpg

to all who asked, i'll put the wheels on the car next week when i have the time and when my dunlop direzza tires arrive.

It's gonna look bad-ass, bro! {thumbup}

be sure to take some pics, that is one sweet ride... {thumbup}

i like your lip :drool:

thanx for the support guys, can't wait to see them on the car!!!!!!

Hey jbigelow-

Your sig is getting annoying.

any updates on your wheels, I really want to see what they look like on the car.

:lol:

:rolleyes: