Installed some KW V3. Corner balance weights inside.
 

Sorry bought the pic quality, I am not one to take pics while I am working on my car (very distracting){thumbdwn} Here is my half ass try...

Taking the Ol setup off. Swifts and Bilsteins
http://img.photobucket.com/albums/v4...3/DSCN0804.jpg

New KW's on
http://img.photobucket.com/albums/v4...DSCN081633.jpg

Messing with the camber (running -2.5 in the front, -1.5in the rear)
http://img.photobucket.com/albums/v4...3/DSCN0813.jpg
Time to weigh and corner balance the girl. Weapon of choice (sorry bout the pic)
http://img.photobucket.com/albums/v4...3/DSCN0819.jpg

The pig on the scales
http://img.photobucket.com/albums/v4...3/DSCN0818.jpg

After corner balancing it here are the #'s
The car had 1/4 gas, no rear seat, spare etc. 245/40/17 nitto nt-o1's and Me in the drivers seat.(track set up)

Left front-1065
Right front-1007
Left rear-629
Right rear-621

My cross % are as follows
Left front to Right rear=50.7%
Right front to Left rear=49.2%

One random shot of the street tires...
http://img.photobucket.com/albums/v4...DSCN082022.jpg

Nice. Never saw that model from Intercomp before...

Corey #89 STU

Looks good Kidloco....glad to see you got them on.

Camber numbers sound great too, that should work out very well for you.


- Andrew

I jealous of your lift

how bout a pic of the volks on?

I will post some up this weekend{thumbup}

Dam! Your calipers are burnt!!!!!!!!!!!

Proper brownbos. :)

What camber plates did you end up using with the KW's?

Works.{thumbup}

How much do you weigh? Curious of the cars total weight is all.

3,322 with me
3,173 with out me. (I'm a feather weight){thumbup}

must be completely empty of fuel, right?


also, your pictures have a slight red x problem :D

edit: the red x's impared my reading skills.

sounds about right. I'm a little fatter in the car with the roll bar, etc, and me and full weight is closer to 3500 :D

Sounds like a good setup Kid, too bad I can't see the pics. Was this done at home or a shop? I'm in Santa Fe. What events do you participate in and where do you track the car? Arroyo Seco?

I did this at my home. I run at Arroyo Seco all the time. I am currently building a Spec Miata so I will be running more SCCA events around the area (AZ, NM, CO). Have you been down to Arroyo? There is a open track event we are running the
17th of Feb. $75 run all day{thumbup}

No, I've never been to Arroyo. I don't think my car will be ready in time for that event, but I really want to come down, it looks like a fun track!