Enkei RPF1 and 14 x 1.5 Studs
Will any of the standard 18 inch RPF1s being run around here accept a 14 x 1.5 stud out the box or only 12 x 1.5?
{thumbup} |
Should run 14mm as they have clearance. otherwise an engineer can drill them a mm.
|
Originally Posted by vaughany
(Post 7371410)
Should run 14mm as they have clearance. otherwise an engineer can drill them a mm.
:beer: |
All times are GMT -7. The time now is 04:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands