Pads for Ralliart BBK
 

Got an Evo 8 with Ralliart 4-pot brake kit, I need replacement pads, front & rear, they are different size than the stock Brembo's. Does anyone know what size are these, brands
I appreciate your help

Should consider posting this up in the Ralliart forum

What are the numbers on the backing plate? I can't make them out in the pic..

Try this thread which notes the Ralliart part no.s

https://www.evolutionm.net/forums/09...ake-guide.html

You have the wrong idea about his brakes I think. He has a 4 piston race brake kit made by Ralliart on his Evo 8. He doesn't have a base model Lancer Ralliart.

I know this, You & I are doing our best to help this OP out, but its likely he has left the house:lol:
Certainly not schooled in the Raliart model & all that Mitsu has to offer:confused:

{thumbup} You're correct, the car is an Evo 8, had a brake upgrade several years back & installed a bigger kit, made by Ralliart.

I see you posted up in the MLR forum. A very good source for all EVO knowledge. Surprised to see that their stumped :confused:

Edit: Mystery likely solved by one of the MLR members. Porsche caliper w/a Raliart decal LOL.

I searched 4 piston Porsche calipers & they have a unique set of dowel pins on the leading & trailing face of the caliper. I lightened up the OP's pic to find the same dowel pin design

https://cimg1.ibsrv.net/gimg/www.evo...27b6585656.jpg