Febest or Hardrace ball joints (rear)
I need to replace 2 ball joints on each side in the rear and I'm looking at either Febest or Hardrace ball joints.
https://www.maperformance.com/produc...20087237967942 Does anyone have any experience with either of these brands? The hardrace are slightly more expensive (about $10 per). Also for a bonus topic, anyone use a harbor freight press for pressing ball joints/bushings? |
Members here have had good results with the hard race parts. I don't have their balljoints, but I do run their toe arms without issue. I'd opt for hard race just because they're known.
|
Febest is just an import company that imports chinese parts for cheap. I'd just go with the HardRace, I had their roll center adjustment joints and they where fantastic, had a much better experience with them than Whiteline. Many members on here that have replaced joints have opted for the HardRace replacements, so I'd say that's your best bet.
|
Originally Posted by Fox_IX
(Post 11875896)
Febest is just an import company that imports chinese parts for cheap. I'd just go with the HardRace, I had their roll center adjustment joints and they where fantastic, had a much better experience with them than Whiteline. Many members on here that have replaced joints have opted for the HardRace replacements, so I'd say that's your best bet.
|
All times are GMT -7. The time now is 09:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands