CRASH BEAMS FOR YOUR JDM BUMPERS l ONES THAT ACTUALLY WORK, NOW IN STOCK!!
#31
Newbie
iTrader: (1)
Join Date: Nov 2009
Location: Corona
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Each crash beam includes the following parts for installation:
1 x Demonwerkz Rear Support
4 x M8 Bolts to bolt into the factory location of the factory crash beam
4 x Washers
2 x 1/4" License plate bolts.
4 x Self Tapping Phillips Screws to mount the lic plate bulbs
2 x mounting plates for the factory lic plate light
2 x 1/2" bolts with washers and nuts to secure the beam to the rear frame of the car (OPTIONAL)
Installation is strait forward and is a simple remove and reinstall!
1 x Demonwerkz Rear Support
4 x M8 Bolts to bolt into the factory location of the factory crash beam
4 x Washers
2 x 1/4" License plate bolts.
4 x Self Tapping Phillips Screws to mount the lic plate bulbs
2 x mounting plates for the factory lic plate light
2 x 1/2" bolts with washers and nuts to secure the beam to the rear frame of the car (OPTIONAL)
Installation is strait forward and is a simple remove and reinstall!
Last edited by evotechnik; Jan 25, 2010 at 02:00 PM.
#34
Former Sponsor
Thread Starter
iTrader: (181)
Join Date: Jun 2007
Location: Glendale, CA
Posts: 2,681
Likes: 0
Received 0 Likes
on
0 Posts
Yes, we have just discussed this with Demonwerkz. These crash beams have been tested on the C-West and Ings bumpers, and on both, the crash beam fit perfectly.