**Touge Factory Limited Edition BLACK NT03's** 2010!!
 

Ok guys.

I've been getting in a lot of requests for another run of the TF Limited Edition Matte Black NT03's. (18x9.5 +27)

$1460.00 shipped within the lower 48 states for each set.
To reserve your set:
- a non-refundable 50% deposit towards the wheels is required.

Arrival for the wheels: End of JUNE 2010

This run of wheels will have Black Valve stems - TOTAL STEALTH! :cool:

These wheels will require a 10mm spacer to clear the Brembo's up front on the Evo.

ORDERS RECEIVED:
1. Jose - Evo X
2. DarthEvoX
3. Gixxer750 - Evo 9
4. 2005notANevo - Subaru STi
5. smjkxsnoopy - Evo 9
6. Lilmarf - Evo
7.
8.
9.
10.
11.
12.


http://tougefactory.com/enkei/nt1.jpg
http://tougefactory.com/enkei/nt2.jpg
http://tougefactory.com/enkei/nt3.jpg
http://tougefactory.com/enkei/nt4.jpg
http://tougefactory.com/enkei/nt5.jpg
http://tougefactory.com/enkei/nt6.jpg
http://tougefactory.com/enkei/nt7.jpg
http://tougefactory.com/enkei/nt9.jpg
http://tougefactory.com/enkei/nt10.jpg

Comes with....
http://www.tougefactory.com/ebay/NT03x8003.jpg

Available - special pricing for anyone purchasing the TF NT03's
Kics 10mm spacers are NOT hubcentric
http://www.tougefactory.com/ebay/10mm.jpg
Ichiba 10mm spacers ARE hubcentric - can use Hubcentric rings.
http://www.tougefactory.com/ebay/ichibaslip3.jpg

Don't forget... we make CUSTOM NT03+M SPECFIC anodized aluminum hubcentric rings!
http://www.tougefactory.com/ebay/yellow2.jpg

Love these wheels! :beer: I'll most likely be in on this group buy.

Anyway I can get this in 18x10.5 +15 offset?

Sorry, Enkei does not make custom offset wheels.

Have you already placed the order with Enkei?
I still need just one of these.

how much Ichiba 10mm spacers ARE hubcentric - can use Hubcentric rings with the purchase of the wheels

Hey, yeah by the time I spoke to you, it was too late to add one.

First Set sold... Thanks Jose!!!!!!

LOOKIN' DECENT!!!! Love the black stems with caps as well.. Might need to get some of those for a set of HRE's in black that i have..

Mike

Just reserved my set, can't wait til the end of June!!! I've been waiting for them to run another GB on these for a while now :headbang:

is any fender work required for fitment of these wheels? do you have any photos of them fitted on an evo? thanks

The front requires the use of a 10mm spacer to clear the calipers.
The rear fenders will need to be rolled.

There is a thread in Evo show and shine for Black NT03 pictures on evo...
I will try to dig it up.

DROOOLLLLL I want these! to bad I just powdercoated my RPF1's black :(

looks very nice. what is the weight on these bad boys?

Uk
 

Hi,

few questions before am definately in!

Do these clear the K-Sport brakes?

Are the hubcentric rings required?

Can you can deliver direct to UK?

What are we looking at for lead times?

Mossy