Is this a good tune?
#1
Newbie
Thread Starter
Join Date: Dec 2021
Location: Brisbane
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Is this a good tune?
Hi Guys,
I am fairly new to tuning, I have a 2012 Lancer Ralliart, recently got it tuned. For mods, I have a Borla Catback exhaust, AEM cold air intake, Cobb 3 port boost controller, 100 cell high flow cat, and a GFB BOV. After the tune, I had around 190KWs. I was wondering, what could be done next to gain more power as well as does the 190KWs on the dyno sheet read from power at the wheel or crank. Lastly was wondering was 190KWs good for what I have done.
I am fairly new to tuning, I have a 2012 Lancer Ralliart, recently got it tuned. For mods, I have a Borla Catback exhaust, AEM cold air intake, Cobb 3 port boost controller, 100 cell high flow cat, and a GFB BOV. After the tune, I had around 190KWs. I was wondering, what could be done next to gain more power as well as does the 190KWs on the dyno sheet read from power at the wheel or crank. Lastly was wondering was 190KWs good for what I have done.
Last edited by BrissyRalliart1; Dec 27, 2021 at 01:43 PM.
#2
EvoM Staff Alumni
iTrader: (3)
Hi Guys,
I am fairly new to tuning, I have a 2012 Lancer Ralliart, recently got it tuned. For mods, I have a Borla Catback exhaust, AEM cold air intake, Cobb 3 port boost controller, 100 cell high flow cat, and a GFB BOV. After the tune, I had around 190KWs. I was wondering, what could be done next to gain more power as well as does the 190KWs on the dyno sheet read from power at the wheel or crank. Lastly was wondering was 190KWs good for what I have done.
I am fairly new to tuning, I have a 2012 Lancer Ralliart, recently got it tuned. For mods, I have a Borla Catback exhaust, AEM cold air intake, Cobb 3 port boost controller, 100 cell high flow cat, and a GFB BOV. After the tune, I had around 190KWs. I was wondering, what could be done next to gain more power as well as does the 190KWs on the dyno sheet read from power at the wheel or crank. Lastly was wondering was 190KWs good for what I have done.
Do you have access to your dyno plot? Post it up so we can see please
Cheers, Joe
#3
Newbie
Thread Starter
Join Date: Dec 2021
Location: Brisbane
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hello / welcome @BrissyRalliart1
Do you have access to your dyno plot? Post it up so we can see please
Cheers, Joe
Do you have access to your dyno plot? Post it up so we can see please
Cheers, Joe
Thread
Thread Starter
Forum
Replies
Last Post