10.2 Android 6.0 Q/A
#18
Evolving Member
Thread Starter
#19
Evolving Member
Thread Starter
#21
So i have a 2015 ralliart with rockford fosgate. got the new android 6.0 unit from HotAudio and their Can-Bus for 2014+. I get no audio when everything is connected up.
I have working steering wheel controls, working backup camera, working bluetooth, working wifi tethering and gps. Just no audio at all.
I've followed the steps on youtube videos for setting up the can-bus in the factory settings and it doesn't make any difference.
Any idea what i'm missing or doing wrong? Below is the can-bus unit that hotaudio sent me (ordered from their ebay store hotaudio-store last week). Also the pic of the can-bus setting screen.
I have working steering wheel controls, working backup camera, working bluetooth, working wifi tethering and gps. Just no audio at all.
I've followed the steps on youtube videos for setting up the can-bus in the factory settings and it doesn't make any difference.
Any idea what i'm missing or doing wrong? Below is the can-bus unit that hotaudio sent me (ordered from their ebay store hotaudio-store last week). Also the pic of the can-bus setting screen.
#22
Evolving Member
Thread Starter
Try to change it to autodetect on the with amplifier
So i have a 2015 ralliart with rockford fosgate. got the new android 6.0 unit from HotAudio and their Can-Bus for 2014+. I get no audio when everything is connected up.
I have working steering wheel controls, working backup camera, working bluetooth, working wifi tethering and gps. Just no audio at all.
I've followed the steps on youtube videos for setting up the can-bus in the factory settings and it doesn't make any difference.
Any idea what i'm missing or doing wrong? Below is the can-bus unit that hotaudio sent me (ordered from their ebay store hotaudio-store last week). Also the pic of the can-bus setting screen.
I have working steering wheel controls, working backup camera, working bluetooth, working wifi tethering and gps. Just no audio at all.
I've followed the steps on youtube videos for setting up the can-bus in the factory settings and it doesn't make any difference.
Any idea what i'm missing or doing wrong? Below is the can-bus unit that hotaudio sent me (ordered from their ebay store hotaudio-store last week). Also the pic of the can-bus setting screen.
The following users liked this post:
Shortstuffmarr (Apr 1, 2017)
#23
Thanks for the reply! Unfortunately when I tried that I still do not get any audio. :/ Everything else is working. Do you have another suggestion that I can try? Thanks in advance.
#24
Evolving Member
Thread Starter
#25
Here's a screenshot.
Downloaded from here https://forum.xda-developers.com/and...-octa-t3575155
the one linked by PX5_6.0 UPDATE (20170324)
Downloaded from here https://forum.xda-developers.com/and...-octa-t3575155
the one linked by PX5_6.0 UPDATE (20170324)
#27
Evolving Member
Thread Starter
That is newer than mine so not sure, strange. Maybe a bad canbus or harness.
Here's a screenshot.
Downloaded from here https://forum.xda-developers.com/and...-octa-t3575155
the one linked by PX5_6.0 UPDATE (20170324)
Downloaded from here https://forum.xda-developers.com/and...-octa-t3575155
the one linked by PX5_6.0 UPDATE (20170324)
#29
Only issues left that we have is that the screen can't handle full brightness setting, it flickers off if you have it above 80%.
The other issue is that i wiped the menu button touch screen calibration and trying to reset the calibration or recalibrate the menu buttons doesn't seem to do anything. Not a big deal since soft-menu is at the top but still annoying.
#30
Evolving Member
Thread Starter
Im glad you fix it, there is a DPI changer or
something like that.
something like that.
Turned out to be a bent pin on one of the connectors that leads to the canbus. Unbent it and it's working fine now.
Only issues left that we have is that the screen can't handle full brightness setting, it flickers off if you have it above 80%.
The other issue is that i wiped the menu button touch screen calibration and trying to reset the calibration or recalibrate the menu buttons doesn't seem to do anything. Not a big deal since soft-menu is at the top but still annoying.
Only issues left that we have is that the screen can't handle full brightness setting, it flickers off if you have it above 80%.
The other issue is that i wiped the menu button touch screen calibration and trying to reset the calibration or recalibrate the menu buttons doesn't seem to do anything. Not a big deal since soft-menu is at the top but still annoying.