ECUFLash speedcut on JDM
Feb 14, 2009, 02:24 PM
#1
Evolving Member
Thread Starter
Join Date: Aug 2008
Location: Singapore
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
ECUFLash speedcut on JDM
Hi,
I am on EVO X GSR and the speed cut function on the ecuflash seems to have no effects at all.
The current setting is at 510 but speed cut still activated at 180km/h
Did anyone else have the same problem?
I am on EVO X GSR and the speed cut function on the ecuflash seems to have no effects at all.
The current setting is at 510 but speed cut still activated at 180km/h
Did anyone else have the same problem?
Feb 17, 2009, 02:40 AM
#3
Evolving Member
Thread Starter
Join Date: Aug 2008
Location: Singapore
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Feb 17, 2009, 03:40 AM
#4
Newbie
Join Date: Oct 2008
Location: N/A
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
According to the magazine in Japan,speedcut has three maps.
You may examine the value of an address below.
But, I do not yet try it.
address="53062"
address="53fb2"
address="533d2"
good luck!
You may examine the value of an address below.
But, I do not yet try it.
address="53062"
address="53fb2"
address="533d2"
good luck!
Feb 17, 2009, 04:40 AM
#5
Evolving Member
Thread Starter
Join Date: Aug 2008
Location: Singapore
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm... 533d2 has a stock value of 42 which 53fb2 consists of 3 digits which I cant see as it only shows 1..
Feb 17, 2009, 07:10 AM
#6
Newbie
Join Date: Feb 2009
Location: Yokohama,Japan
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Perhaps three addresses are right. In ECU finished with tuning of the GSR SST of the model for my 2008 years in three addresses a constant value (Limiter on：380km, Limiter off：378km) is set.
Because I made a xml file for trial, please use it if good.
Feb 17, 2009, 01:39 PM
#7
Evolving Member
Thread Starter
Join Date: Aug 2008
Location: Singapore
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Feb 18, 2009, 09:04 AM
#9
Newbie
Join Date: Feb 2009
Location: Yokohama,Japan
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Please replace this line following with a description of speed limiter of contents of evo10base.xml.
<table name="Speed Limiter #1" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
<table name="Speed Limiter #2" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
<table name="Speed Limiter #3" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
and replace this line following with a description of speed limiter of contents of 52360016.xml.
<table name="Speed Limiter #1" address="53062">
</table>
<table name="Speed Limiter #2" address="53fb2">
</table>
<table name="Speed Limiter #3" address="533d2">
</table>
<table name="Speed Limiter #1" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
<table name="Speed Limiter #2" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
<table name="Speed Limiter #3" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
and replace this line following with a description of speed limiter of contents of 52360016.xml.
<table name="Speed Limiter #1" address="53062">
</table>
<table name="Speed Limiter #2" address="53fb2">
</table>
<table name="Speed Limiter #3" address="533d2">
</table>
Last edited by yokohama_evox; Feb 18, 2009 at 09:06 AM.
Feb 18, 2009, 02:42 PM
#10
Evolving Member
Thread Starter
Join Date: Aug 2008
Location: Singapore
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Please replace this line following with a description of speed limiter of contents of evo10base.xml.
<table name="Speed Limiter #1" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
<table name="Speed Limiter #2" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
<table name="Speed Limiter #3" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
and replace this line following with a description of speed limiter of contents of 52360016.xml.
<table name="Speed Limiter #1" address="53062">
</table>
<table name="Speed Limiter #2" address="53fb2">
</table>
<table name="Speed Limiter #3" address="533d2">
</table>
<table name="Speed Limiter #1" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
<table name="Speed Limiter #2" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
<table name="Speed Limiter #3" category="Limits" type="2D" scaling="VehicleSpeed">
<table name="X" type="Static Y Axis" elements="2">
<data>Limiter ON</data>
<data>Limiter OFF</data>
</table>
</table>
and replace this line following with a description of speed limiter of contents of 52360016.xml.
<table name="Speed Limiter #1" address="53062">
</table>
<table name="Speed Limiter #2" address="53fb2">
</table>
<table name="Speed Limiter #3" address="533d2">
</table>
Anyone already tried these settings?
