Tephra V2 XML Help!
#1
Newbie
Thread Starter
Join Date: Oct 2017
Location: California
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Tephra V2 XML Help!
Hello,
Im a new fellow evo x forums member. I got my car tuned with a tephra v2 map and im in a situation where I need to pass smog relatively soon, which cant be done on my current tune. Im trying to get a hold of the xml definition for ROM ID 55570206 to be able to open my ROM in ecuflash, save it, and upload my stock map in order to pass smog then revert back to my pro tune. Was wondering if any of you can help me gather this definiton?
Thanks a lot in advance for anyone who can help me out!
Im a new fellow evo x forums member. I got my car tuned with a tephra v2 map and im in a situation where I need to pass smog relatively soon, which cant be done on my current tune. Im trying to get a hold of the xml definition for ROM ID 55570206 to be able to open my ROM in ecuflash, save it, and upload my stock map in order to pass smog then revert back to my pro tune. Was wondering if any of you can help me gather this definiton?
Thanks a lot in advance for anyone who can help me out!
#3
Newbie
Thread Starter
Join Date: Oct 2017
Location: California
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
The problem is I got tuned with a test pipe so my rear o2 sensor was turned off and also my cat monitor is not ready. being from CA thats a fail./: So my only hope is being able to get a hold lf that xml to open the map and enable the rear o2 or use the xml to be able to re-flash the map after flashing the stock tune to get the smog check done.
#4
Evolved Member
The problem is I got tuned with a test pipe so my rear o2 sensor was turned off and also my cat monitor is not ready. being from CA thats a fail./: So my only hope is being able to get a hold lf that xml to open the map and enable the rear o2 or use the xml to be able to re-flash the map after flashing the stock tune to get the smog check done.
#5
Newbie
Thread Starter
Join Date: Oct 2017
Location: California
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
The map got uploaded by my tuner so I do not have the tephra xml files and ive been looking through all the related threads on here and in the evo x forums see if anyone can help out but no luck. Thats why i posted this in hopes that someone has the xml i need.
#6
Evolved Member
you need to find the tephra v2 thread on here.
Download and save all xmls to
local disk c, program file x86, open ecu, ecu flash, rommetadata, roms, mitsubishi, evo
Download and save all xmls to
local disk c, program file x86, open ecu, ecu flash, rommetadata, roms, mitsubishi, evo
#7
Newbie
Thread Starter
Join Date: Oct 2017
Location: California
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I have gone through every post and every page on the tephra v2 thread that he started. I also went to tephra’s website and there is no download link or copy of any xml for my ROM. He only provides them for the v1. I went on golden evo’s website aswell and he only provides xml’s for the stock ROM’s. Not sure if I am required to re-purchase it to gain access to my map? 👎🏼
Thread
Thread Starter
Forum
Replies
Last Post
zheng0416288390
ECU Flash
3
Oct 1, 2009 07:26 AM