Evo X car cranks but won't turn over
 

Recently installed a fuel rail and fic2150 injectors. After the install the car cranks but won't start unless I push the gas pedal. The injectors have been scaled for the extra fuel and the car is getting the proper fuel pressure. Car dies unless I hold down the gas pedal as well. Any ideas what may be going on here? The car is also on E85. Didn't have any problems starting the car before the injectors and fuel rail were installed.

What injector scaling, latency and fuel type?

Not sure about the scaling and latency but my tuner has tried a ton of different variations. The car is getting the proper fuel pressure. We've done a boost leak test and put new spark plugs in so far.

its on E85 as well

Well can't really help without any info.. your injector scaling should be about 1300 on e85 on 2150's