Help! Clutch pedal all the way down...
#1
Newbie
Thread Starter
Join Date: Jan 2008
Location: Nawlins
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Help! Clutch pedal all the way down...
Well guys, I was pulling out of my driveway today and I put my car to 1st gear and right when I'm letting my clutch go it just "popped" and the car stalled. At this point the clutch pedal was all way down on the floor and I didn't know what had happened.
And ideas to what has happened and how to fix it??
And ideas to what has happened and how to fix it??
#2
Evolving Member
iTrader: (3)
The master clutch cylinder just busted.
I blew 3 units before converting to E9 version.
My suggestion is you go the same route using the E9 master clutch or at least get the AMS ring with a stock replacement (my last one with the ring did not last very long either).
https://www.evolutionm.net/forums/ev...-breaking.html
I blew 3 units before converting to E9 version.
My suggestion is you go the same route using the E9 master clutch or at least get the AMS ring with a stock replacement (my last one with the ring did not last very long either).
https://www.evolutionm.net/forums/ev...-breaking.html
Last edited by slonez; Aug 22, 2009 at 05:11 PM. Reason: add info
#4
Newbie
Thread Starter
Join Date: Jan 2008
Location: Nawlins
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
I think it might be the master cylinder, and slonez I might have to try the E9 version then if that is true. Also, it could be the clutch line also. I'll have to find out monday when I get my car towed to the workshop.
Thread
Thread Starter
Forum
Replies
Last Post
bbong
Evo Engine / Turbo / Drivetrain
5
Jun 11, 2017 05:25 AM
marcouxa1
Lancer Tires, Wheels, Brakes & Suspension - Sponsored by The Tire Rack
2
Mar 8, 2014 02:28 PM