Turbo Oil pressure regulator
#1
Newbie
Thread Starter
Turbo Oil pressure regulator
anyone running turbo-smart oil pressure regulator? for anyone running it where do you route the oil pressure regulator drain? On the instruction says i cant route to the turbo oil drain line..others return it on the valve cover and is that safe?
Last edited by gerikivan; Mar 7, 2020 at 12:14 AM. Reason: typo
#3
Newbie
Thread Starter
i found a thread on the evo 9 that they usually route to valve cover or in the inspection block hole.. do you know if we have a inspection block hole by chance?
#5
Evolved Member
iTrader: (25)
I run it to the valve cover with no issues even though I am pumping it into the baffled area. The regulator works by bypassing the oil to the bottom port when pressure exceeds 40psi so it works like a pop-off valve that bleeds pressure to the bottom port. Because of this fact you don't need to drain it down so you can actually have it pump up to the valve cover like you see below on my setup. I ran it with my GTX3582r and now with my S362 SXE.
Thread
Thread Starter
Forum
Replies
Last Post
Abacus
Evo Engine / Turbo / Drivetrain
70
Jul 4, 2021 05:14 PM
gasolinebaptism
Evo Engine / Turbo / Drivetrain
0
Mar 12, 2015 08:00 PM