EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)

- Evo X Engine / Turbo / Drivetrain (https://www.evolutionm.net/forums/evo-x-engine-turbo-drivetrain-258/)

- - Homemade Cone Shield (https://www.evolutionm.net/forums/evo-x-engine-turbo-drivetrain/399552-homemade-cone-shield.html)

Red08EVO

Feb 11, 2009 03:57 PM

Homemade Cone Shield

Did the filter mod and made my own shield free of charge {thumbup}
http://i398.photobucket.com/albums/p...mentaspx-5.jpg

sdfontanini

Feb 11, 2009 03:59 PM

L@@ks good how did you do it?

Red08EVO

Feb 11, 2009 04:21 PM

its aluminum. made it use the factory groments and the one bolt in front to hold it. made a bracket from the maf housing to the plate, and welded the side and bottom along the bottom.

Evo8ftw

Feb 11, 2009 04:22 PM

it actually does look really good. doesnt look cheap or anything.

boostin20

Feb 11, 2009 04:23 PM

Nice, I'm doing this friday. I'm thinking about stainless and polishing it.

Red08EVO

Feb 11, 2009 04:24 PM

Quote:

Originally Posted by Evo8ftw (Post 6681827)

it actually does look really good. doesnt look cheap or anything.

thanks{thumbup}

Red08EVO

Feb 11, 2009 04:25 PM

Quote:

Originally Posted by boostin20 (Post 6681832)

Nice, I'm doing this friday. I'm thinking about stainless and polishing it.

mine started polish, but was to flashy for me. Used truck bedliner paint to give it the textured feel and look aha.

lancer2show

Feb 11, 2009 04:29 PM

good job! it really looks oem.

All times are GMT -7. The time now is 10:15 AM.