CaptainCrunch

Can someone explain to me like I'm 5 please.. I'd like some of that sweet blow off sounds. I don't wanna get a tune, and I don't like oils (bad experiences on MAF in the past)... and I am reading that a drop in filter/intake is my best bet. Anything that fits my parameters? Thanks!

AJV

iTrader: (3)

Are you trolling?

Robevo RS

iTrader: (16)

move your intake in the car the best bet is under the dash on the passenger side.
Multiple benefits. Whoos Whoos very noticeable, and if you use a air conditioner properly , always sucks around 70F air temperature.
Also your airfilter will less a lot longer since its prevented from the elements , like dust water etc.

its a win win situation.

CaptainCrunch

lolol i heart this thread. sadly, its not a troll job. I want that blow off!

splattj

iTrader: (2)

I have an aFe dry flow drop-in panel filter on my car. Marginally more intake noise including a little turbo BPV noise when the windows are down.

.M.

Robevo RS

iTrader: (16)

any open element intake set up will give you that , even with a stock BOV

.M.

^True. But... with a decently loud exhaust you won't hear it that much. I'm running a tomei evo 9 valve and I barely hear it. Which I don't mind.

Rasperin

Here's a video on how to make mad choo choo:
No turbo even required.

CaptainCrunch

Any recommendations? Thanks.

migs647

iTrader: (19)

ETS intake gives a nice sound. I'm sure any of that design will too. I believe they run one of the largest filters.

m0nkie

I have the ETS intake and it makes that woosh woosh sound you'll be happy with it.

I hear it over my turbo back exhaust. of course you need to rev it a little bit to hear the whole thing.

or maybe a diverter valve if you don't want the high pitch bov sound

Robevo RS

iTrader: (16)

really ANY open intake you will hear it. ETS AMS Any Japan made etc. . Just make sure you buy a brand name , no Weapon R or Ebay stuff . lol

and stay the same diamater inside the intake tube around the factory maf sensor, unless you will get retuned immediately. Like you should with the HKS racing suction kit.

4G63_EVO

iTrader: (4)

Ive got an injen intake with a blox Bolt on filter and a 9 BOV, my induction sound is really loud as well as my Blow off

CaptainCrunch

You guys are awesome! Thanks everyone!

Sorry for being such a noob. Just don't want to mess anything up here.

So this is the ETS you're talking about?

http://www.extremeturbosystems.com/E...-X-Intake.html

That filter element doesn't need oiling? No tune needed? And no other concerns down the road??

Thanks again for putting up with the noob questions.