When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Evo X How Tos / InstallationsPost or link to your detailed how to / installation articles in here. If you have any questions regarding the how tos, feel free to post them in the Request sub-forum.
It really depends honestly. In the winter it builds up more water **** from condensation in the engine, so it would completely fill for me once a month. During the summer it will usually get filled 1/4 of the way at by every oil change. Its mostly a combination of water/oil for me.
It really depends honestly. In the winter it builds up more water **** from condensation in the engine, so it would completely fill for me once a month. During the summer it will usually get filled 1/4 of the way at by every oil change. Its mostly a combination of water/oil for me.
Yea I'll just do that or every oil change too but thanks for all the help
I got one question
Do you know how to install aem fuel pressure regulator kit? Cuz I can't find nothing about it
Yea I'll just do that or every oil change too but thanks for all the help
I got one question
Do you know how to install aem fuel pressure regulator kit? Cuz I can't find nothing about it
i had to add some fluid the next morning when the car was fully cooled off.
overall install was 1/10 difficulty, the bottom bolt that holds the expansion tank in place is a pain in the ***, i had to use a long 14mm.
- just dump the coolant it into a plastic bottle & take it to a shop that disposes of car fluids. you can pick up extra vacuum plugs at auto zone for 2$ as well. and if you want to get an actual pipe plug just go to home depot and get a 1/4" plug for your intake so you don't have to worry about a little silicone bung with a zip tie/ clamp fitting on it
What size thread is the fitting for the replacement of the pcv valve? I know one side can be 8 or 10an but the other side? The side that gets threaded into the valve cover.
What size thread is the fitting for the replacement of the pcv valve? I know one side can be 8 or 10an but the other side? The side that gets threaded into the valve cover.
Jun 28, 2016, 09:40 AM
well alright thanks for all the help man 
