Driven fab v3 catch can/coolant expansion tank
#16
Evolved Member
iTrader: (1)
It really depends honestly. In the winter it builds up more water **** from condensation in the engine, so it would completely fill for me once a month. During the summer it will usually get filled 1/4 of the way at by every oil change. Its mostly a combination of water/oil for me.
what I usually find.
what I usually find.
#17
Newbie
Thread Starter
Join Date: Oct 2015
Location: houston
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
It really depends honestly. In the winter it builds up more water **** from condensation in the engine, so it would completely fill for me once a month. During the summer it will usually get filled 1/4 of the way at by every oil change. Its mostly a combination of water/oil for me.
what I usually find.
what I usually find.
#19
Newbie
Thread Starter
Join Date: Oct 2015
Location: houston
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
#22
Evolving Member
i had to add some fluid the next morning when the car was fully cooled off.
overall install was 1/10 difficulty, the bottom bolt that holds the expansion tank in place is a pain in the ***, i had to use a long 14mm.
- just dump the coolant it into a plastic bottle & take it to a shop that disposes of car fluids. you can pick up extra vacuum plugs at auto zone for 2$ as well. and if you want to get an actual pipe plug just go to home depot and get a 1/4" plug for your intake so you don't have to worry about a little silicone bung with a zip tie/ clamp fitting on it
overall install was 1/10 difficulty, the bottom bolt that holds the expansion tank in place is a pain in the ***, i had to use a long 14mm.
- just dump the coolant it into a plastic bottle & take it to a shop that disposes of car fluids. you can pick up extra vacuum plugs at auto zone for 2$ as well. and if you want to get an actual pipe plug just go to home depot and get a 1/4" plug for your intake so you don't have to worry about a little silicone bung with a zip tie/ clamp fitting on it
#26
Evolving Member
iTrader: (4)
Join Date: Mar 2009
Location: Dirty streets of Jersey
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
What size thread is the fitting for the replacement of the pcv valve? I know one side can be 8 or 10an but the other side? The side that gets threaded into the valve cover.
Thanks in advance
Thanks in advance
#27
Thread
Thread Starter
Forum
Replies
Last Post
DrivenFab
Evo 'For Sale' External Engine / Power
30
Nov 21, 2016 11:38 AM
FS[SouthEast]: Driven Fab V3 -10 Catch Can/Coolant Tank
shomesomesho
For Sale - Engine / Drivetrain / Power
3
Nov 6, 2015 07:58 AM
shomesomesho
For Sale - Engine / Drivetrain / Power
3
Apr 12, 2014 04:06 PM
Chaz17
Vendor Service / Parts / Tuning Review
3
Aug 26, 2013 03:35 PM
BakZamGai
Evo Engine / Turbo / Drivetrain
1
Aug 3, 2004 02:02 AM