|
Red Dragon's 08 PB Evo X MR
Evolution M Garage
Update January 22, 2010 Its been a long time since i posted and update. I have been to busy working with my other project. New Mod: Prosport 52mm Boost Gauge - White and Prosport 52mm Gauge Cup. I mounted the gauge beside the mirror to avoid clutter on the dash. IMO i think it looks better than having gauges on the dash. http://img.photobucket.com/albums/v4...3/DSC00169.jpg http://img.photobucket.com/albums/v4...3/DSC00174.jpg My co pilot. 3 foot Hello Kitty. http://img.photobucket.com/albums/v4...3/DSC00230.jpg My new project 240sx with sr20 swap http://img.photobucket.com/albums/v4...3/DSC00209.jpg http://img.photobucket.com/albums/v4...3/DSC00203.jpg |
May 22, 2009
New Track times Best time: Reaction: .574 60 ft: 1.923 ET: 13.415 MPH: 101.798 Elevation:1653 Feet Temp: 18-20 Celsius (65-70F) ASC Off, S-Sport Mode, Auto Shift Tranny held strong. Fan keep the trans pretty cool. Trans seem to shift 500 rpms early on first gear and then redline the other gears. Reaction times were not too good. Its hard to time it out so you dont rev the motor for too long. I tried manual shift, times were slower (13.796 slowest time) Performance Mods T1R Racing Test Pipe Nisei Engineering 6061 AL UICP - Nisei Red Nisei Engineering 6061 AL Intake Pipe - Matte Black Tactrix Open Port 2.0 - Gunzo 91 Oct Tune No air filter Spal 5.2” Transmission Cooler Fan _______________________________________ May 11, 2009 Just some old pics. Debaged with new Evolution MR Emblem. http://img.photobucket.com/albums/v4...DSC00103-1.jpg You can see the the big key scratch on the right! Damn haters! http://img.photobucket.com/albums/v4...DSC00106-1.jpg New Carbon Grill! http://img.photobucket.com/albums/v4...DSC00095-2.jpg Pic of the custom bracket for the 02 sensor. http://img.photobucket.com/albums/v4...3/DSC00092.jpg Parked on the front lawn! http://img.photobucket.com/albums/v4...3/DSC00086.jpg http://img.photobucket.com/albums/v4...DSC00087-1.jpg ______________________________________________ Jan. 4, 2009 New Mods! Nisei Engineering 6061 AL 1pc UICP, Nisei Red. Nisei Engineering 6061 AL Intake Pipe Kit, Matte Black. VVME 4300k HID Fog lights. Nisei make some great products, coating turned out great. Intake kit was abit tight, but with some effort and time, it all fit together. Hid matched very good with the stock lights. Hid required to wire in a 30 amp relay. Sorry for the bad pics. I will take some more pics in the morning. http://img.photobucket.com/albums/v4...DSC00083-1.jpg http://img.photobucket.com/albums/v4...3/DSC00084.jpg http://img.photobucket.com/albums/v4...3/DSC00085.jpg _______________________________________ Dec. 16, 2008 New mods! T1R Resonated Test pipe. My exhaust sounds just like the stock exhaust. Great quality and fitment. The test pipe came with a antifouler but it did not prevent cel to come on . I am going to try out a 90 bend o2 eliminator to see if it will eliminate cel. Hopefully it works. Another drawback is that the T1R test pipe does not come with a bracket to hold the o2 sensor wire. Infact many test pipes made, do not have a wire bracket. I dont understand how hard it is to weld a peice of metal with holes in it on to a peice of pipe! I had to make my own 02 wire bracket. I used a nylon coated metal strapping and some zip ties to hold the wire up. I ran the wire above the pipe instead of below the pipe (stock). I will take a pic next time. Also got T1R Led dome lights. I replaced my trunk light. Huge improvement. More to come Nisei UICP, Intake and HID Fogs My brother's dog making love to it. http://img.photobucket.com/albums/v4...DSC00082-1.jpg http://img.photobucket.com/albums/v4...3/DSC00081.jpg http://img.photobucket.com/albums/v4...DSC00080-1.jpg http://img.photobucket.com/albums/v4...DSC00079-1.jpg ________________________________________ Oct 18, 2008 Finally got some pics of my new rims and tires. My wheels are Advan RGII 18X10 +25 5X114.5 GTR Face wraped with Kumho Ecsta MX (KU15) - 275/35R18. The front wheel rubs on the fenderliner and partialy on the mudflaps. The rear wheel hits the fenders on hard cornering. I definetly need to roll the rear fenders. For people that are going to get 10 wide rims with 25 offset or equivalent, stick with 265/35R18 tires. http://img.photobucket.com/albums/v4...8092008114.jpg http://img.photobucket.com/albums/v4...3/DSC00052.jpg http://img.photobucket.com/albums/v4...DSC00053-1.jpg http://img.photobucket.com/albums/v4...3/DSC00058.jpg http://img.photobucket.com/albums/v4...DSC00059-1.jpg http://img.photobucket.com/albums/v4...DSC00062-1.jpg ________________________________________ Sept 12, 2008 Some quatermile time i forgot to post up. Evo X MR - All Stock, no mods. Full interior. Elevation - 1,579.7 FT Temp: 30c - 20c Runs were done at 8pm - 9pm. All runs were done in S-sport mode in auto. Runs were done with traction control off and launch control. 60ft - 2.167 1/4 - 14.153@97.551 60ft - 2.064 1/4 - 13.966@98.055 Best Time! 60ft - 2.115 1/4 - 14.026@98.277 No air filter run. Slower time??? Next up 3 turn wastegate mod. Some New Pics http://img.photobucket.com/albums/v4...67131_5369.jpg http://img.photobucket.com/albums/v4...DSC00040-1.jpg http://img.photobucket.com/albums/v4...3/DSC00038.jpg http://img.photobucket.com/albums/v4...DSC00032-2.jpg http://img.photobucket.com/albums/v4...67132_5682.jpg http://img.photobucket.com/albums/v4...DSC00042-1.jpg More pics to come with new rims. ________________________________________ July 2, 2008 Finally got my MR in Saskatoon. A few things that i have noticed. 1. The car is very stable at high speeds. Steering wheel is very firm compared to other cars. 2. The car is alot stiffer compared to my bros 08 STI. Evo feels more sporty. Sti feels more comfortable. Evo seat are more supportive. Sti seats are softer. 3. High beams are part of the HID. there is a metal flap that goes up when you turn on the High Beams. Light beside the projectors are your DRLS. 4. You are able to operate and change the settings on the navi while moving. The STi navi requires you to stop the car before changing the settings. More pics http://img.photobucket.com/albums/v4...3/DSC00128.jpg http://img.photobucket.com/albums/v4...3/DSC00129.jpg http://img.photobucket.com/albums/v4...3/DSC00134.jpg http://img.photobucket.com/albums/v4...3/DSC00135.jpg _______________________________________ June 24, 2008 Yay! I finally got my 08 Phantom Black Evo X MR Premium on June 23. I bought it at Vancouver Mitsubishi from Adam Hsu (great salesman). I bought the car for MSRP at $53,153. Saskatoon Mitsubishi had $5000 mark-up on all of their Evo. It will be a 1700km drive home. I also have some Advan RGII 18X10 +25 in gold waiting to be put on. I don’t have any shoes yet but I plan to put on some Kumho 275/35R18. More pics to come http://img.photobucket.com/albums/v4...3/IMG_3266.jpg http://img.photobucket.com/albums/v4...3/IMG_3267.jpg http://img.photobucket.com/albums/v4...3/IMG_3269.jpg http://img.photobucket.com/albums/v4...3/IMG_3270.jpg http://img.photobucket.com/albums/v4...3/IMG_3271.jpg http://img.photobucket.com/albums/v4...3/DSC00126.jpg http://img.photobucket.com/albums/v4...3/DSC00117.jpg http://img.photobucket.com/albums/v4...3/DSC00118.jpg http://img.photobucket.com/albums/v4...3/DSC00120.jpg http://img.photobucket.com/albums/v4...3/DSC00122.jpg |
2008 Mitsubishi Lancer Evolution X MR Premium - Phantom Black
2.0 MIVEC Turbocharged 4B11T - Twin-Clutch SST - CZ4A Technology Package Aerodynamics Package _______________________________________ EXTERIOR OEM Front Air Dam OEM Side Skirts OEM Rear Corner Air Dam OEM Front Brake Air Guides OEM Mud Flaps: “Lancer Evolution” 3M Paint Protection Film Tinted Windows: Front-50% Rear-20% Mole Skin Window Tint Protector "Dafarmer69" LED Parking Light VVME 4300K HID Fogs 35W Seibon Carbon Fiber Front Grille “Evolution MR” Trunk Emblem INTERIOR OEM All Season Floor Mats "Dafarmer69" 96 LED Dome Light Ralliart Seat Belt Pads T1R LED Trunk Dome Lights Air Spencer CS-X3 Squash Gentex Auto Dim Mirror Beltronics Vector 955 Radar Detector Country Joy Radar Detector Mount Prosport 52mm Boost Gauge - White Prosport 52mm Gauge Cup ENGINE & DRIVETRAIN Fumoto Oil Drain Valve: F-106 Valve w/Nipple Wastegate Actuator Mod (1/2 Turn) T1R Racing Test Pipe Touge Factory 90 Bend O2 Sensor CEL Fix Nisei Engineering 6061 AL UICP - Nisei Red Nisei Engineering 6061 AL Intake Pipe - Matte Black Tactrix Open Port 2.0 - Gunzo 91 Oct Tune Spal 5.2” Transmission Cooler Fan Perrin Drop-In Foam Filter WHEELS & SUSPENSION Advan RGII 18X10 +25 5X114.5 GTR Face Gold Kumho Ecsta MX (KU15) - 275/35R18 - 95Y - BW Muteki Lugnuts Closed End Black Dunlop Winter Sport 3D - 235/40R18 XL - BSW |
Congratulations sir. Looks awesome. Love to see the CDN Evos.
Get the heated seats or sunroof? I see the Nav (sweet)... Anyway, enjoy. Looks like you're well on your modding way... |
sick...
|
Congrats on the new purchase.
|
53k+ for mitsu... yikes =x
aside from the price, good looking car and great taste w/ the advans =) |
oh god i can NOT wait to see the MR on the RGII's
i'm all giddy like a little school girl. ...wait |
Any plans on selling the MR BBS rims? :)
|
I know the price is in Canadian that is a damn expensive car:crap:
|
Looks really good, it's gonna look even better when the Advan's are on.
|
you're a true baller.
|
that price is crazy!!!! congrats on the car though :)
|
jesus 53k. omg 53k, lol
car looks amazing though |
The black metallic paint looks sweet, congrats. Love the wheels you'll be putting on, but seems like you will ruin the look with mudflaps...
|
| All times are GMT -7. The time now is 07:20 AM. |
© 2026 MH Sub I, LLC dba Internet Brands