ASC/ABS hydraulic unit - handbrake install help
Jan 13, 2018, 02:08 PM
#1
Newbie
Thread Starter
iTrader: (2)
Join Date: Dec 2012
Location: Hopkinsville, Ky
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
ASC/ABS hydraulic unit - handbrake install help
Hey all,
Figuring out which way to go with a handbrake install. Wondering on the ASC unit there are the 4 individual 3/16 brake lines going to each brake, easy to figure out. There are two 1/4 " lines from the master cylinder though, and I read in the service manual group 35c for removal of the unit that the forward most one is secondary and the firewall side one is primary. Are they both equal brake pressure lines? Is one maybe rear/front? or is it simply a backup system? Any help would be appreciated.
Figuring out which way to go with a handbrake install. Wondering on the ASC unit there are the 4 individual 3/16 brake lines going to each brake, easy to figure out. There are two 1/4 " lines from the master cylinder though, and I read in the service manual group 35c for removal of the unit that the forward most one is secondary and the firewall side one is primary. Are they both equal brake pressure lines? Is one maybe rear/front? or is it simply a backup system? Any help would be appreciated.
Dec 30, 2020, 12:11 PM
#2
Newbie
Thread Starter
iTrader: (2)
Join Date: Dec 2012
Location: Hopkinsville, Ky
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Anyone got anything? Thinking to plumb in prior to hyd unit on the secondary, but i believe i read somewhere its a FR/RL and FL/RR system output from the hydraulic unit, which wouldn't be good to plumb prior.
Thread
Thread Starter
Forum
Replies
Last Post
R/TErnie
Evo Engine / Turbo / Drivetrain
3
Feb 10, 2013 06:26 PM
Evolution Z
Evo X Tires / Wheels / Brakes / Suspension
25
Aug 31, 2012 05:12 PM