any body sho me how to change the front bumper............thanks..............

 

someone correct me if im wrong, but from memory this is what i recall....there is 1 screw (phillips) and 1 10mm in each front fender/wheel well, 2-3 10mm where your license plate goes(license plate bracket must come off), and possibly 1 10mm on the opposite side of the plate, lift the hood and you will see a few 10mm that are obvious and the 2 12mm for the radiator support brackets. there are also some plastic pop-ins the u can use a flat head screw driver to lift out. hope this helps

 

check out the post in How To's labeled . . . How remove bumper and install HID bulbs!

 

2 or 3 screws up top, one on each fender well and a bunch of clips. And don't forget to unclip or remove the undertray

James

 

the undertray is the most time consuming part of the job the rest will take u 15 min tops

 

https://www.evolutionm.net/forums/sh...ad.php?t=67956

 

what bumper do you got now?

http://www.driftinks.com

 

the shroud on the oil cooler will resist when you go to pull it off, just a heads up