BOV option for fp black?
Thread Starter
Evolved Member
iTrader: (29)
Joined: Jan 2009
Posts: 608
Likes: 5
From: Detroit/ Philly/ Tokyo
so im getting a fp black installed on my evo 8.
i was wondering if i would need a tial BOV or something similar to hold up my 30psi boost.
and if so, is this all that i need?
http://store.forcedperformance.net/m...gory_Code=TiAL
do i need any special brackets for fitment?
do i even need a BOV?
are there any other bov that you would recommend?
thanks!
i was wondering if i would need a tial BOV or something similar to hold up my 30psi boost.
and if so, is this all that i need?
http://store.forcedperformance.net/m...gory_Code=TiAL
do i need any special brackets for fitment?
do i even need a BOV?
are there any other bov that you would recommend?
thanks!
Last edited by bnr34rb26dett; Feb 28, 2011 at 12:25 PM.
answers are below in red
so im getting a fp black installed on my evo 8.
i was wondering if i would need a tial BOV or something similar to hold up my 30psi boost.
and if so, is this all that i need?
http://store.forcedperformance.net/m...gory_Code=TiAL
Tial BOV seems to be the popular choice among the evos on here, however, its not the only choice, there are a number of other good tested bov's such as synapse, stock 9 or jdm metal bov (crushed)...etc
From what I have read, evo 8's come equipped with plastic bov's that tend to leak even at stock boost lvls so if ur planning on running 30psi then its probably a good idea to swap it.
do i need any special brackets for fitment?
You will need an aftermarket ucip that is flanged for a tial bov.
do i even need a BOV?
If ur stock one doesnt leak at higher boost then u dont need it, however, seeing all the data on the stock 8's, they all tend to leak.
are there any other bov that you would recommend?
synapse, forge, aps twin vent....etc
if u'r running on stock maf (non sd) then I would recommend a recirculating bov. Tial also makes a recirculating bov.
here is a list of some of the bov's out there:
http://synapseengineering.com/
http://www.tialsport.com/prod_bv.htm
http://www.forgemotorsport.co.uk/con...t&catalog=0006
and here are few bov threads
https://www.evolutionm.net/forums/ev...59231-bov.html
https://www.evolutionm.net/forums/ev...-question.html
https://www.evolutionm.net/forums/ev...ov-valves.html
https://www.evolutionm.net/forums/ev...turbo-bov.html
https://www.evolutionm.net/forums/ev...iart-2-0t.html
thanks!
ur welcome, and gl!
so im getting a fp black installed on my evo 8.
i was wondering if i would need a tial BOV or something similar to hold up my 30psi boost.
and if so, is this all that i need?
http://store.forcedperformance.net/m...gory_Code=TiAL
Tial BOV seems to be the popular choice among the evos on here, however, its not the only choice, there are a number of other good tested bov's such as synapse, stock 9 or jdm metal bov (crushed)...etc
From what I have read, evo 8's come equipped with plastic bov's that tend to leak even at stock boost lvls so if ur planning on running 30psi then its probably a good idea to swap it.
do i need any special brackets for fitment?
You will need an aftermarket ucip that is flanged for a tial bov.
do i even need a BOV?
If ur stock one doesnt leak at higher boost then u dont need it, however, seeing all the data on the stock 8's, they all tend to leak.
are there any other bov that you would recommend?
synapse, forge, aps twin vent....etc
if u'r running on stock maf (non sd) then I would recommend a recirculating bov. Tial also makes a recirculating bov.
here is a list of some of the bov's out there:
http://synapseengineering.com/
http://www.tialsport.com/prod_bv.htm
http://www.forgemotorsport.co.uk/con...t&catalog=0006
and here are few bov threads
https://www.evolutionm.net/forums/ev...59231-bov.html
https://www.evolutionm.net/forums/ev...-question.html
https://www.evolutionm.net/forums/ev...ov-valves.html
https://www.evolutionm.net/forums/ev...turbo-bov.html
https://www.evolutionm.net/forums/ev...iart-2-0t.html
thanks!
ur welcome, and gl!
Last edited by detroit pistins; Feb 10, 2011 at 10:38 AM.
Thread Starter
Evolved Member
iTrader: (29)
Joined: Jan 2009
Posts: 608
Likes: 5
From: Detroit/ Philly/ Tokyo
answers are below in red
so im getting a fp black installed on my evo 8.
i was wondering if i would need a tial BOV or something similar to hold up my 30psi boost.
and if so, is this all that i need?
http://store.forcedperformance.net/m...gory_Code=TiAL
Tial BOV seems to be the popular choice among the evos on here, however, its not the only choice, there are a number of other good tested bov's such as synapse, stock 9 or jdm metal bov (crushed)...etc
From what I have read, evo 8's come equipped with plastic bov's that tend to leak even at stock boost lvls so if ur planning on running 30psi then its probably a good idea to swap it.
do i need any special brackets for fitment?
You will need an aftermarket ucip that is flanged for a tial bov.
do i even need a BOV?
If ur stock one doesnt leak at higher boost then u dont need it, however, seeing all the data on the stock 8's, they all tend to leak.
are there any other bov that you would recommend?
synapse, forge, aps twin vent....etc
if u'r running on stock maf (non sd) then I would recommend a recirculating bov. Tial also makes a recirculating bov.
here is a list of some of the bov's out there:
http://synapseengineering.com/
http://www.tialsport.com/prod_bv.htm
http://www.forgemotorsport.co.uk/con...t&catalog=0006
and here are few bov threads
https://www.evolutionm.net/forums/ev...59231-bov.html
https://www.evolutionm.net/forums/ev...-question.html
https://www.evolutionm.net/forums/ev...ov-valves.html
https://www.evolutionm.net/forums/ev...turbo-bov.html
https://www.evolutionm.net/forums/ev...iart-2-0t.html
thanks!
ur welcome, and gl!
so im getting a fp black installed on my evo 8.
i was wondering if i would need a tial BOV or something similar to hold up my 30psi boost.
and if so, is this all that i need?
http://store.forcedperformance.net/m...gory_Code=TiAL
Tial BOV seems to be the popular choice among the evos on here, however, its not the only choice, there are a number of other good tested bov's such as synapse, stock 9 or jdm metal bov (crushed)...etc
From what I have read, evo 8's come equipped with plastic bov's that tend to leak even at stock boost lvls so if ur planning on running 30psi then its probably a good idea to swap it.
do i need any special brackets for fitment?
You will need an aftermarket ucip that is flanged for a tial bov.
do i even need a BOV?
If ur stock one doesnt leak at higher boost then u dont need it, however, seeing all the data on the stock 8's, they all tend to leak.
are there any other bov that you would recommend?
synapse, forge, aps twin vent....etc
if u'r running on stock maf (non sd) then I would recommend a recirculating bov. Tial also makes a recirculating bov.
here is a list of some of the bov's out there:
http://synapseengineering.com/
http://www.tialsport.com/prod_bv.htm
http://www.forgemotorsport.co.uk/con...t&catalog=0006
and here are few bov threads
https://www.evolutionm.net/forums/ev...59231-bov.html
https://www.evolutionm.net/forums/ev...-question.html
https://www.evolutionm.net/forums/ev...ov-valves.html
https://www.evolutionm.net/forums/ev...turbo-bov.html
https://www.evolutionm.net/forums/ev...iart-2-0t.html
thanks!
ur welcome, and gl!
thank you.
Thread
Thread Starter
Forum
Replies
Last Post
I-5 Evo
Evo Engine / Turbo / Drivetrain
121
Oct 28, 2017 06:04 AM
OakosAutomotive
Evo 'For Sale' External Engine / Power
211
Oct 26, 2012 11:12 AM




