![]() |
My first post! Evo8 mod Q's
Hi All,
Just got my Evo8 and found some brand new spares that a local guy bought, never installed and then sold his Evo! Bearing in mind that i am in South Africa and it is much more difficult for me to get spares than you, let me know if you thinkk my list is pretty good so far. I got: XS Engineering 3" downpipe Greddy Upper Intercooler pipe GSC 268/272 Cams Walbro 255 pump 10.5 Hotside and Actuator HKS Drop in Filter Next on the list: Exedy Twin Plate! |
welcome to the forums ! ..
as you are in Africa with those mods, u'll need some sort of tunning device .. either ! sending your ecu to USA to get an ecu flash .. or get another tunning device which a tuner can tune for u .. Power FC, ems , AFC .. etc |
welcome to the forums ! i was thinking Ecu_Tek reflash for now, there is a local agent with a 4hib dyno.. then later on maybe a Autronic..we have a great local tuner for these systems Will these mods make a strong streetable car? not looking for a drag car, have one of those already.. |
Originally Posted by dialate
(Post 3924175)
Hi All,
Just got my Evo8 and found some brand new spares that a local guy bought, never installed and then sold his Evo! Bearing in mind that i am in South Africa and it is much more difficult for me to get spares than you, let me know if you thinkk my list is pretty good so far. I got: XS Engineering 3" downpipe Greddy Upper Intercooler pipe GSC 268/272 Cams Walbro 255 pump 10.5 Hotside and Actuator HKS Drop in Filter Next on the list: Exedy Twin Plate! Ek is EX-Sa nou in die UK. Those bits should give you gains of around 40-50bhp over std, I assume yours is 276 std jap issue in SA |
Originally Posted by Speedline
(Post 3924280)
Hello Hoe Gaan dit?
Ek is EX-Sa nou in die UK. Those bits should give you gains of around 40-50bhp over std, I assume yours is 276 std jap issue in SA and with a bit more boost hopefully a bit more ;) standard jap issue.. |
| All times are GMT -7. The time now is 07:09 PM. |
© 2026 MH Sub I, LLC dba Internet Brands